PartsTable / COMPONENT / 34665-155
34665-155
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include center_hole_diameter: 3.959 INCHES MINIMUM AND 4.015 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, specification/standard_data: 80205-NAS1593 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-112-9442, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
34665-155
NSN: 5330-00-112-9442 FSC: 5330 CAGE: 55820 — RTX CORPORATION DIV PRATT & WHITNEY (USA)
SPECIFICATIONS
center_hole_diameter 3.959 INCHES MINIMUM AND 4.015 INCHES MAXIMUM IN cross-sectional_height 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN specification/standard_data 80205-NAS1593 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD NSN 5330-00-112-9442
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 34665-155
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER HOLE DIAMETER: 3.959 INCHES MINIMUM AND 4.015 INCHES MAXIMUM IN
• SPECIFICATION/STANDARD DATA: 80205-NAS1593 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
• CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER 3.959 INCHES MINIMUM AND 4.015 INCHES MAXIMUM IN SPECIFICATION/STANDARD DATA 80205-NAS1593 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD CROSS-SECTIONAL HEIGHT 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
74-8141 Interchangeable interchangeable cross-reference
interchangeable
52237 Interchangeable interchangeable cross-reference
interchangeable
30017 Interchangeable interchangeable cross-reference
interchangeable
AN6234-2 Interchangeable interchangeable cross-reference
interchangeable
6002-349 Interchangeable interchangeable cross-reference
interchangeable
621-16749 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 34665-155?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34665-155?
34665-155 is a PACKING,PREFORMED.
What parts can replace 34665-155?
There are 9 known substitutes for 34665-155: 74-8141, 52237, 30017 and 6 more. Substitute compatibility should be verified for your specific system.
Is 34665-155 still available?
34665-155 is currently cancelled.
Request a Quote — 34665-155