PartsTable
Technical Data Sheet
PartsTable / MRO / 3465-1
3465-1 ✓ Verified by PartsTable
InLine · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

InLine premium USB 2.0 extension withe magnetic foot and gol plated contacts. With this extension you can plug the USB 2.0 devices directly at the worktation, a tedious plugging at the pc casing is no longer neccessary. The usefull magnetic foot provides safe foothold on metal surfaces.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-095-3604, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3465-1
NSN: 5310-00-095-3604
FSC: 5310
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
end_typePIN
materialGLASS OPTICAL OR GLASS OR GLASS PLATE
nut_styleROUND
slot_depth0.625 INCHES NOMINAL IN
nut_diameter4.240 INCHES MINIMUM AND 4.260 INCHES MAXIMUM IN
pin_diameter0.375 INCHES NOMINAL IN
thread_class3B
adjustabilityNONADJUSTABLE
nut_thickness0.287 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
thread_seriesUN
overall_length2.031 INCHES NOMINAL IN
fork_span_width0.438 INCHES NOMINAL IN
NSN5310-00-095-3604
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3465-1 · InLine ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT STYLE: ROUND
•
THREAD SERIES: UN
•
THREAD QUANTITY PER INCH: 12
•
NOMINAL THREAD SIZE: 3.500 INCHES IN
•
HARDNESS RATING: 250.0 BRINELL STANDARD MINIMUM AND 300.0 BRINELL STANDARD MAXIMUM
•
THREAD DIRECTION: RIGHT-HAND
•
SURFACE TREATMENT: LEAD OVERALL
•
NUT DIAMETER: 4.240 INCHES MINIMUM AND 4.260 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NUT STYLEROUND
THREAD SERIESUN
THREAD QUANTITY PER INCH12
NOMINAL THREAD SIZE3.500 INCHES IN
HARDNESS RATING250.0 BRINELL STANDARD MINIMUM AND 300.0 BRINELL STANDARD MAXIMUM
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTLEAD OVERALL
NUT DIAMETER4.240 INCHES MINIMUM AND 4.260 INCHES MAXIMUM IN
NUT THICKNESS0.287 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
DRIVE POINT WIDTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
34651Interchangeable
interchangeable cross-reference
interchangeable
FC2202Interchangeable
interchangeable cross-reference
interchangeable
A1199U749Interchangeable
interchangeable cross-reference
interchangeable
18159FXInterchangeable
interchangeable cross-reference
interchangeable
811162Interchangeable
interchangeable cross-reference
interchangeable
277340Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3465-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3465-1?
3465-1 is a LINK,WHEEL CYLINDER,HYDRAULIC BR manufactured by InLine. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3465-1?
There are 8 known substitutes for 3465-1: 34651, FC2202, A1199U749 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3465-1?
3465-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-095-3604. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3465-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026