PartsTable
Technical Data Sheet
34593 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TUBE AND FITTINGS,METALLIC is a the manufacturer industrial component. Key specifications include material: COPPER TUBING, design_form: PREBENT, thread_class: 3B SINGLE END, wall_thickness: 0.032 INCHES NOMINAL IN, thread_direction: RIGHT-HAND SINGLE END, seat_angle_in_deg: 37.0 SINGLE END. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-580-6588, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
34593
NSN: 5331-00-580-6588
FSC: 5331 — O-RING
CAGE: 56521 — REYNOLDS EQUIPMENT CO (USA)
SPECIFICATIONS
materialCOPPER TUBING
design_formPREBENT
thread_class3B SINGLE END
wall_thickness0.032 INCHES NOMINAL IN
thread_directionRIGHT-HAND SINGLE END
seat_angle_in_deg37.0 SINGLE END
mating_end_quantity1 FIRST END
nominal_thread_size0.562 INCHES SINGLE END IN
end_connection_styleRAISED SECOND END
tube_outside_diameter0.375 INCHES NOMINAL IN
thread_series_designatorUNF SINGLE END
NSN5331-00-580-6588
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 34593 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER: 4.599 INCHES MINIMUM AND 4.675 INCHES MAXIMUM IN
ELONGATION PERCENTAGE: 331 MAXIMUM
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER: 4.329 INCHES MINIMUM AND 4.389 INCHES MAXIMUM IN
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER4.599 INCHES MINIMUM AND 4.675 INCHES MAXIMUM IN
ELONGATION PERCENTAGE331 MAXIMUM
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER4.329 INCHES MINIMUM AND 4.389 INCHES MAXIMUM IN
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
AS568A-010Interchangeable
interchangeable cross-reference
interchangeable
J-16387 PIECE 19Interchangeable
interchangeable cross-reference
interchangeable
002222Interchangeable
interchangeable cross-reference
interchangeable
T59014Interchangeable
interchangeable cross-reference
interchangeable
2-214-N574-70Interchangeable
interchangeable cross-reference
interchangeable
2285AAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 34593?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34593?
34593 is a TUBE AND FITTINGS,METALLIC.
What parts can replace 34593?
There are 18 known substitutes for 34593: AS568A-010, J-16387 PIECE 19, 002222 and 15 more. Substitute compatibility should be verified for your specific system.
Is 34593 still available?
34593 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 34593