PartsTable
Technical Data Sheet
Download PDF

344967 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

344967: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, coil_quantity: 10 1/2, inside_diameter: 9.14 MILLIMETERS NOMINAL MM, special_features: PAINT LIGHT ORANGE BS 557 ON ONE END ONLY, style_designator: CYLINDRICAL, spring_free_length: 31.50 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-602-8642, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
344967
NSN: 5340-00-602-8642
NIINs: 006028642, 013507015
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity10 1/2
inside_diameter9.14 MILLIMETERS NOMINAL MM
special_featuresPAINT LIGHT ORANGE BS 557 ON ONE END ONLY
style_designatorCYLINDRICAL
spring_free_length31.50 MILLIMETERS NOMINAL MM
spring_solid_length13.86 MILLIMETERS NOMINAL MM
coil_helix_directionRIGHT-HAND
spring_deflection_rate2.67 KILOGRAMS PER MILLIMETER NOMINAL KG
spring_free_outside_diameter11.78 MILLIMETERS NOMINAL MM
NSN5340-00-602-8642
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 344967 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.312 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 1.714 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.572 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.312 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.250 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
SECOND LEG WIDTH1.714 INCHES NOMINAL IN
SECOND LEG LENGTH1.572 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.312 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 344967?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 344967?
344967 is a BRACKET,ANGLE.
What is the NSN for 344967?
344967 is cataloged in the U.S. Government catalog under NSN 5340-00-602-8642. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 344967

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.