PartsTable
Technical Data Sheet
Download PDF

344611 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

344611: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY R-405 OR RUBBER SILICONE CLASS Q OVERALL, hole_diameter: 0.140 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.375 INCHES MINIMUM AND 1.422 INCHES MAXIMUM IN, overall_length: 5.375 INCHES MINIMUM AND 5.422 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, cross-sectional_thickness: 0.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-060-4869, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
344611
NSN: 5330-01-060-4869
FSC: 5330 — Packing and Gasket Materials
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
materialNICKEL ALLOY R-405 OR RUBBER SILICONE CLASS Q OVERALL
hole_diameter0.140 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.375 INCHES MINIMUM AND 1.422 INCHES MAXIMUM IN
overall_length5.375 INCHES MINIMUM AND 5.422 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
bolt_hole_quantity2
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL AND SYNTHETIC RUBBER
outside_edge_to_bolt_hole_center_distance_along_width0.234 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.328 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width0.937 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length4.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-060-4869
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 344611 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
•
BOLT HOLE QUANTITY: 2
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 4.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.937 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH5.375 INCHES MINIMUM AND 5.422 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
OVERALL WIDTH1.375 INCHES MINIMUM AND 1.422 INCHES MAXIMUM IN
BOLT HOLE QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH4.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.937 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.328 INCHES NOMINAL IN
MATERIALNICKEL ALLOY R-405 OR RUBBER SILICONE CLASS Q OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 344611?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 344611?
344611 is a GASKET.
What is the NSN for 344611?
344611 is cataloged in the U.S. Government catalog under NSN 5330-01-060-4869. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 344611

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.