The Press,forcing,hydraulic, cataloged under National Stock Number 3442-01-382-0867, is classified within Federal Supply Class 3442 (Hydraulic and Pneumatic Presses, Power Driven) of the Metalworking Machinery (continued) group. Government technical data includes 1 specification, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3442-01-382-0867 |
| Item Name | Press,forcing,hydraulic |
| FSC / FSG | 3442 / 34 — Hydraulic and Pneumatic Presses, Power Driven |
| Status | ACTIVE |
| General Characteristics Item Description | 60 TON CAPACITY; FRAME UPRIGHTS 1 IN. BY 3 1/2 IN. RECTANGLE; HEAD, BED RAILS, 10 IN. CHANNEL; BASE MEMBERS 4 IN. CHANNEL; WIDTH BETWEEN UPRIGHTS 40 IN.; WIDTH BETWEEN TABLE RAILS 8 IN.; TABLE TRAVEL 36 IN.; MAXIMUM VERTICAL CLEARANCE 42 IN.; BED SUPPORT PINS 1 IN. DIAMETER; 4 BED SUPPORT PINS; INSIDE UPRIGHTS 6 IN.; RAM DIAMETER 3 1/4 IN.; CYLINDER BORE 5 IN. DIAMETER; TABLE SPACING INCREMENTS 6 IN.; LENGTH 75 IN.; WIDTH 39 IN.; HEIGHT 83 IN.; LEFT TO RIGHT CYLINDER MOVEMENT 26 IN.; SHIPPING WEIGHT 1345 POUNDS; 5 HORSEPOWER; 220/440 VOLT; THREE PHASE; 60 CYCLE; RAM SPEED NO LOAD 12 IN. PER MINUTE; RAM SPEED HALF CAPACITY 9.5 IN. PER MINUTE; RAM SPEED FULL CAPACITY 8.2 IN. PER MINUTE LBS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| H60-14MD5 | 3/9 Design control — primary reference Hypress Technologies Inc |
| PRESSCVC | 5/1 Secondary reference Dla Aviation Engineering Div Department of Defense |
NSN 3442-01-382-0867 is a Press,forcing,hydraulic, classified under FSC 3442, Hydraulic and Pneumatic Presses, Power Driven. Status: active.
Key specifications for 3442-01-382-0867: General Characteristics Item Description: 60 TON CAPACITY; FRAME UPRIGHTS 1 IN. BY 3 1/2 IN. RECTANGLE; HEAD, BED RAILS, 10 IN. CHANNEL; BASE MEMBERS 4 IN. CHANNEL; WIDTH BETWEEN UPRIGHTS 40 IN.; WIDTH BETWEEN TABLE RAILS 8 IN.; TABLE TRAVEL 36 IN.; MAXIMUM VERTICAL CLEARANCE 42 IN.; BED SUPPORT PINS 1 IN. DIAMETER; 4 BED SUPPORT PINS; INSIDE UPRIGHTS 6 IN.; RAM DIAMETER 3 1/4 IN.; CYLINDER BORE 5 IN. DIAMETER; TABLE SPACING INCREMENTS 6 IN.; LENGTH 75 IN.; WIDTH 39 IN.; HEIGHT 83 IN.; LEFT TO RIGHT CYLINDER MOVEMENT 26 IN.; SHIPPING WEIGHT 1345 POUNDS; 5 HORSEPOWER; 220/440 VOLT; THREE PHASE; 60 CYCLE; RAM SPEED NO LOAD 12 IN. PER MINUTE; RAM SPEED HALF CAPACITY 9.5 IN. PER MINUTE; RAM SPEED FULL CAPACITY 8.2 IN. PER MINUTE LBS; Special Features: MOVABLE CYLINDER; CYLINDER AND PUMP ARE SEPARATED ON PRESS GIVING MORE SIDE MOVEMENT OF THE RAM SINCE THE CYLINDER DOES NOT HOUSE THE PUMP AND MOTOR; ADJUSTABLE RELIEF VALVE; ADJUSTABLE TABLE WITH SELF LOCKING TABLE WINCH; EQUIPPED WITH SAFETY DEVICES TO PREVENT OVER EXTENSION OF THE RAM, AND OVER CAPACITY OF THE PRESS. 1 specification is documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.