The Press,forcing,hydraulic, cataloged under National Stock Number 3442-01-382-0787, is classified within Federal Supply Class 3442 (Hydraulic and Pneumatic Presses, Power Driven) of the Metalworking Machinery (continued) group. Government technical data includes 1 specification, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3442-01-382-0787 |
| Item Name | Press,forcing,hydraulic |
| FSC / FSG | 3442 / 34 — Hydraulic and Pneumatic Presses, Power Driven |
| Status | ACTIVE |
| General Characteristics Item Description | 40 TON CAPACITY; FRAM UPRIGHTS, 7 IN. CHANNEL; HEAD, BED RAILS, 8 IN. CHANNEL; BASE MEMBERS 3 IN. BY 2 IN. ANGLE; WIDTH BETWEEN UPRIGHTS 30 1/4 IN.; WIDTH BETWEEN TABLE RAILS 7 IN.; TABLE TRAVEL 36 IN.; MAXIMUM VERTICAL CLEARANCE 41 1/2 IN.; BED SUPPORT PINS 7/8 IN. DIAMETER; 4 BED SUPPORT PINS; RAM TRAVEL 14 IN.; RAM DIAMETER 2 3/4 IN.; CYLENDER BORE 3 1/2 IN. DAIMETER; TABLE SPACING INCREMENTS 4 IN.; LENGTH 63 IN.; WIDTH 30 IN.; HEIGHT 82 IN.; LEFT TO RIGHT CYLINDER MOVEMENT 21 IN.; SHIPPING WEIGHT 820 POUNDS; 5 HORSEPOWER, 220/440 VOLT; THREE PHASE; 60 CYCLE; RAM SPEED NO LOAD 24 IN.PER MINUTE; RAM SPEED HALF CAPACITY 18.5 IN. PER MINUTE; RAM SPEED FULL CAPACITY 14.5 IN. PER MINUTE LBS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| PRESSCVC | 5/1 Secondary reference Dla Aviation Engineering Div Department of Defense |
| H40-14MD5 | 3/9 Design control — primary reference Hypress Technologies Inc |
NSN 3442-01-382-0787 is a Press,forcing,hydraulic, classified under FSC 3442, Hydraulic and Pneumatic Presses, Power Driven. Status: active.
Key specifications for 3442-01-382-0787: General Characteristics Item Description: 40 TON CAPACITY; FRAM UPRIGHTS, 7 IN. CHANNEL; HEAD, BED RAILS, 8 IN. CHANNEL; BASE MEMBERS 3 IN. BY 2 IN. ANGLE; WIDTH BETWEEN UPRIGHTS 30 1/4 IN.; WIDTH BETWEEN TABLE RAILS 7 IN.; TABLE TRAVEL 36 IN.; MAXIMUM VERTICAL CLEARANCE 41 1/2 IN.; BED SUPPORT PINS 7/8 IN. DIAMETER; 4 BED SUPPORT PINS; RAM TRAVEL 14 IN.; RAM DIAMETER 2 3/4 IN.; CYLENDER BORE 3 1/2 IN. DAIMETER; TABLE SPACING INCREMENTS 4 IN.; LENGTH 63 IN.; WIDTH 30 IN.; HEIGHT 82 IN.; LEFT TO RIGHT CYLINDER MOVEMENT 21 IN.; SHIPPING WEIGHT 820 POUNDS; 5 HORSEPOWER, 220/440 VOLT; THREE PHASE; 60 CYCLE; RAM SPEED NO LOAD 24 IN.PER MINUTE; RAM SPEED HALF CAPACITY 18.5 IN. PER MINUTE; RAM SPEED FULL CAPACITY 14.5 IN. PER MINUTE LBS; Special Features: MOVABLE CYLINDER; CYLINDER AND PUMP ARE SEPARATED ON PRESS GIVING MORE SIDE MOVMENT OF THE RAM SINCE THE CYLINDER DOES NOT HOUSE THE PUMP AND MOTOR; ADJUSTABLE RELIEF VALVE; ADJUSTABLE WITH SELF LOCKING TABLE WINCH; EQUIPPED WITH SAFETY DEVICES TO PREVENT OVER EXTENSION OF THE RAM, AND OVER CAPACITY OF THE PRESS. 1 specification is documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.