The Press,forcing,hydraulic, cataloged under National Stock Number 3442-01-381-6819, is classified within Federal Supply Class 3442 (Hydraulic and Pneumatic Presses, Power Driven) of the Metalworking Machinery (continued) group. Government technical data includes 1 specification, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3442-01-381-6819 |
| Item Name | Press,forcing,hydraulic |
| FSC / FSG | 3442 / 34 — Hydraulic and Pneumatic Presses, Power Driven |
| Status | ACTIVE |
| General Characteristics Item Description | 100 TON CAPACITY; FRAME UPRIGHTS 1 1/2 IN. BY 5 IN.; HEAD, BED RAILS, 15 IN. CHANNEL; BASE MEMBERS 5 IN. CHANNEL; WIDTH BETWEEN UPRIGHTS 48 IN.; WIDTH BETWEEN TABLE RAILS 15 IN.; TABLE TRAVEL 30 IN.; MAXIMUM VERTICAL CLEARANCE 36 1/2 IN.; BED SUPPORT PINS 2 IN. DIAMETER; BED SUPPORT PINS 2 EACH; INSIDE UPRIGHTS 12 IN.; RAM TRAVEL 14 IN.; RAM DIAMETER 3 1/4 IN.; CYLINDER BORE 6 IN. DIAMETER; TABLE SPACING INCREMENTS 6 IN.; LENGTH 87 IN.; WIDTH 48 IN.; HEIGHT 99 IN.; LEFT TO RIGHT CYLINDER MOVEMENT 31 IN.; SHIPPING WEIGHT 2858 POUNDS; 220/440 VOLT; THREE PHASE; 60 CYCLE; 5 HORSEPOWER; NO LOAD CAPACITY 7.5 IN. PER MINUTE; HALF CAPACITY 6.4 IN. PER MINUTE; FULL CAPACITY 5.3 IN. PER MINUTE; MAGNETIC STARTER LBS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| H100-14MD5 | 3/9 Design control — primary reference Hypress Technologies Inc |
| PRESSCVC | 5/1 Secondary reference Dla Aviation Engineering Div Department of Defense |
NSN 3442-01-381-6819 is a Press,forcing,hydraulic, classified under FSC 3442, Hydraulic and Pneumatic Presses, Power Driven. Status: active.
Key specifications for 3442-01-381-6819: General Characteristics Item Description: 100 TON CAPACITY; FRAME UPRIGHTS 1 1/2 IN. BY 5 IN.; HEAD, BED RAILS, 15 IN. CHANNEL; BASE MEMBERS 5 IN. CHANNEL; WIDTH BETWEEN UPRIGHTS 48 IN.; WIDTH BETWEEN TABLE RAILS 15 IN.; TABLE TRAVEL 30 IN.; MAXIMUM VERTICAL CLEARANCE 36 1/2 IN.; BED SUPPORT PINS 2 IN. DIAMETER; BED SUPPORT PINS 2 EACH; INSIDE UPRIGHTS 12 IN.; RAM TRAVEL 14 IN.; RAM DIAMETER 3 1/4 IN.; CYLINDER BORE 6 IN. DIAMETER; TABLE SPACING INCREMENTS 6 IN.; LENGTH 87 IN.; WIDTH 48 IN.; HEIGHT 99 IN.; LEFT TO RIGHT CYLINDER MOVEMENT 31 IN.; SHIPPING WEIGHT 2858 POUNDS; 220/440 VOLT; THREE PHASE; 60 CYCLE; 5 HORSEPOWER; NO LOAD CAPACITY 7.5 IN. PER MINUTE; HALF CAPACITY 6.4 IN. PER MINUTE; FULL CAPACITY 5.3 IN. PER MINUTE; MAGNETIC STARTER LBS; Special Features: DIRECT COUPLED PUMP FLANGE MOTORS; MOVABLE CYLINDER GIVING MORE SIDE MOVEMENT OF THE RAM SINCE THE CYLINDER DOES NOT HOUSE THE PUMP AND MOTOR; ADJUSTABLE RELIEF VALVE; TABLE IS ADJUSTABLE WITH SELF-LOCKING TABLE WINCH; EQUIPPED WITH SAFETY DEVICES TO PREVENT OVER EXTENSION OF THE RAM, AND OVER CAPACITY OF THE PRESS. 1 specification is documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.