PartsTable
Technical Data Sheet
Download PDF

343MS075P001REV1 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

343MS075P001REV1: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.375 INCHES NOMINAL IN, length: 1.170 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.144 INCHES NOMINAL IN, overall_height: 1.330 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-965-5527, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
343MS075P001REV1
NSN: 5340-00-965-5527
FSC: 5340 — Hardware, Commercial
CAGE: 49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
width1.375 INCHES NOMINAL IN
length1.170 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.144 INCHES NOMINAL IN
overall_height1.330 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
material_thickness0.025 INCHES NOMINAL IN
loop/holding_dimension1.062 INCHES NOMINAL IN
specification/standard_data26512-GC842E69 MANUFACTURERS SPECIFICATION
distance_from_loop_center_to_end0.691 INCHES NOMINAL IN
NSN5340-00-965-5527
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 343MS075P001REV1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.170 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 1.062 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 26512-GC842E69 MANUFACTURERS SPECIFICATION
•
DISTANCE FROM LOOP CENTER TO END: 0.691 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
WIDTH: 1.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.330 INCHES NOMINAL IN
LENGTH1.170 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION1.062 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA26512-GC842E69 MANUFACTURERS SPECIFICATION
DISTANCE FROM LOOP CENTER TO END0.691 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
WIDTH1.375 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.144 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
GC842E69Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
6022-1AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 343MS075P001REV1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 343MS075P001REV1?
343MS075P001REV1 is a CLIP,SPRING TENSION.
What parts can replace 343MS075P001REV1?
There are 2 known substitutes for 343MS075P001REV1: GC842E69, 6022-1A. Substitute compatibility should be verified for your specific system.
What is the NSN for 343MS075P001REV1?
343MS075P001REV1 is cataloged in the U.S. Government catalog under NSN 5340-00-965-5527. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 343MS075P001REV1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.