The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.125 INCHES NOMINAL IN, length: 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN, material: STEEL COMP 1065 OVERALL, hole_diameter: 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, overall_height: 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-581-2325, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
343MS004P031
NSN:5340-00-581-2325 FSC:5340 — Hardware, Commercial CAGE:49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
width
1.125 INCHES NOMINAL IN
length
0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
material
STEEL COMP 1065 OVERALL
hole_diameter
0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
overall_height
0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.020 INCHES NOMINAL IN
loop/holding_dimension
0.370 INCHES MINIMUM AND 0.420 INCHES MAXIMUM IN
distance_from_loop_center_to_end
0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
material_document_and_classification
SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN
5340-00-581-2325
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.370 INCHES MINIMUM AND 0.420 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
WIDTH: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
LENGTH
0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION
0.370 INCHES MINIMUM AND 0.420 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.020 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END
0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
SURFACE TREATMENT
CADMIUM AND CHROMATE OVERALL
WIDTH
1.125 INCHES NOMINAL IN
MATERIAL
STEEL COMP 1065 OVERALL
HOLE DIAMETER
0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 343MS004P031?
343MS004P031 is a CLIP,SPRING TENSION.
What parts can replace 343MS004P031?
There are 2 known substitutes for 343MS004P031: 21513P1, 640000P18. Substitute compatibility should be verified for your specific system.
What is the NSN for 343MS004P031?
343MS004P031 is cataloged in the U.S. Government catalog under NSN 5340-00-581-2325. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.