PartsTable
Technical Data Sheet
Download PDF

343MR004P049REVH — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

343MR004P049REVH: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.906 INCHES NOMINAL IN, length: 1.190 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.162 INCHES NOMINAL IN, overall_height: 1.340 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-964-4684, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
343MR004P049REVH
NSN: 5340-00-964-4684
FSC: 5340 — Hardware, Commercial
CAGE: 3B150 — RAYTHEON COMPANY DBA RAYTHEON CO (USA)
SPECIFICATIONS
width0.906 INCHES NOMINAL IN
length1.190 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.162 INCHES NOMINAL IN
overall_height1.340 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
material_thickness0.032 INCHES NOMINAL IN
loop/holding_dimension1.125 INCHES NOMINAL IN
distance_from_loop_center_to_end0.710 INCHES NOMINAL IN
NSN5340-00-964-4684
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 343MR004P049REVH MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.190 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 1.125 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.710 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
WIDTH: 0.906 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.340 INCHES NOMINAL IN
LENGTH1.190 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION1.125 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.710 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
WIDTH0.906 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.162 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
100-200-15-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 343MR004P049REVH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 343MR004P049REVH?
343MR004P049REVH is a CLIP,SPRING TENSION.
What parts can replace 343MR004P049REVH?
There is 1 known substitute for 343MR004P049REVH: 100-200-15-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 343MR004P049REVH?
343MR004P049REVH is cataloged in the U.S. Government catalog under NSN 5340-00-964-4684. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 343MR004P049REVH

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.