PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 343M0010P005
343M0010P005 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.031 INCHES NOMINAL IN, length: 0.530 INCHES NOMINAL IN, material: STEEL COMP 1065 OVERALL, hole_diameter: 0.128 INCHES NOMINAL IN, overall_height: 0.610 INCHES NOMINAL IN, special_features: 3 SLOTS ON B DIMENSION SPACED 15/64 IN. APART IN.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-726-3204, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
343M0010P005
NSN: 5340-00-726-3204
FSC: 5340
CAGE: 3B150 — RAYTHEON COMPANY DBA RAYTHEON CO (USA)
SPECIFICATIONS
width1.031 INCHES NOMINAL IN
length0.530 INCHES NOMINAL IN
materialSTEEL COMP 1065 OVERALL
hole_diameter0.128 INCHES NOMINAL IN
overall_height0.610 INCHES NOMINAL IN
special_features3 SLOTS ON B DIMENSION SPACED 15/64 IN. APART IN
surface_treatmentCADMIUM OVERALL
material_thickness0.016 INCHES NOMINAL IN
loop/holding_dimension0.500 INCHES NOMINAL IN
distance_from_loop_center_to_end0.600 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-726-3204
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 343M0010P005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO END: 0.600 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.128 INCHES NOMINAL IN
•
WIDTH: 1.031 INCHES NOMINAL IN
•
LENGTH: 0.530 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1065 OVERALL
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO END0.600 INCHES NOMINAL IN
HOLE DIAMETER0.128 INCHES NOMINAL IN
WIDTH1.031 INCHES NOMINAL IN
LENGTH0.530 INCHES NOMINAL IN
MATERIALSTEEL COMP 1065 OVERALL
SPECIAL FEATURES3 SLOTS ON B DIMENSION SPACED 15/64 IN. APART IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
OVERALL HEIGHT0.610 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
60032Upgraded Successor
successor cross-reference
successor
38836Interchangeable
interchangeable cross-reference
interchangeable
26083Interchangeable
interchangeable cross-reference
interchangeable
533.5000Interchangeable
interchangeable cross-reference
interchangeable
20032Interchangeable
interchangeable cross-reference
interchangeable
600-5-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 343M0010P005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 343M0010P005?
343M0010P005 is a CLIP,SPRING TENSION.
What parts can replace 343M0010P005?
There are 14 known substitutes for 343M0010P005: 60032, 38836, 26083 and 11 more. Substitute compatibility should be verified for your specific system.
Is 343M0010P005 still available?
343M0010P005 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 343M0010P005

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026