PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 34330-001
34330-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, outside_diameter: 2.078 INCHES MINIMUM AND 2.094 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 1.563 INCHES NOMINAL IN, cross-sectional_thickness: 0.110 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-051-0100, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
34330-001
NSN: 5330-01-051-0100
FSC: 5330
CAGE: 75175 — CONCORD INSTRUMENTS CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
outside_diameter2.078 INCHES MINIMUM AND 2.094 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter1.563 INCHES NOMINAL IN
cross-sectional_thickness0.110 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-051-0100
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 34330-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.078 INCHES MINIMUM AND 2.094 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.563 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL THICKNESS: 0.110 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER2.078 INCHES MINIMUM AND 2.094 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER1.563 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL THICKNESS0.110 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
A2622WInterchangeable
interchangeable cross-reference
interchangeable
34330Interchangeable
interchangeable cross-reference
interchangeable
7100229669Interchangeable
interchangeable cross-reference
interchangeable
021200-15577Interchangeable
interchangeable cross-reference
interchangeable
SK-2440Interchangeable
interchangeable cross-reference
interchangeable
SK-2440-11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 34330-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34330-001?
34330-001 is a GASKET.
What parts can replace 34330-001?
There are 8 known substitutes for 34330-001: A2622W, 34330, 7100229669 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 34330-001?
34330-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-051-0100. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 34330-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026