PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3432-10
3432-10 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SOCKET,SOCKET WRENCH is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_length: 28.0 MILLIMETERS NOMINAL MM, drive_end_shape: SQUARE SINGLE END INTERNAL, style_designator: INTERNAL-INTERNAL, features_provided: POWER TOOL, surface_treatment: OXIDE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-851-3214, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3432-10
NSN: 5310-00-851-3214
FSC: 5310
CAGE: 72653 — GC/WALDOM INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length28.0 MILLIMETERS NOMINAL MM
drive_end_shapeSQUARE SINGLE END INTERNAL
style_designatorINTERNAL-INTERNAL
features_providedPOWER TOOL
surface_treatmentOXIDE OVERALL
drive_surface_size0.375 INCHES NOMINAL SINGLE END IN
wrenching_surface_size10.0 MILLIMETERS NOMINAL SINGLE END MM
wrenching_surface_shape6 POINT SINGLE END INTERNAL
NSN5310-00-851-3214
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3432-10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
MATERIAL: CELLULOSE OVERALL
•
STYLE DESIGNATOR: SHOULDERED
•
HOLE DIAMETER: 0.195 INCHES NOMINAL IN
•
SHOULDER HEIGHT: 0.031 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
SHOULDER DIAMETER: 0.308 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.375 INCHES NOMINAL IN
MATERIALCELLULOSE OVERALL
STYLE DESIGNATORSHOULDERED
HOLE DIAMETER0.195 INCHES NOMINAL IN
SHOULDER HEIGHT0.031 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
SHOULDER DIAMETER0.308 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
2156Interchangeable
interchangeable cross-reference
interchangeable
SP333JInterchangeable
interchangeable cross-reference
interchangeable
111-0333-09Interchangeable
interchangeable cross-reference
interchangeable
41686Interchangeable
interchangeable cross-reference
interchangeable
DS-934225Interchangeable
interchangeable cross-reference
interchangeable
443-1430-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3432-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3432-10?
3432-10 is a SOCKET,SOCKET WRENCH.
What parts can replace 3432-10?
There are 21 known substitutes for 3432-10: 2156, SP333J, 111-0333-09 and 18 more. Substitute compatibility should be verified for your specific system.
Is 3432-10 still available?
3432-10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3432-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026