PartsTable
Technical Data Sheet
Download PDF

343-126-3 ITEM11 — NUT,TUBE COUPLING

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

343-126-3 ITEM11: NUT,TUBE COUPLING.

The NUT,TUBE COUPLING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, special_features: USED ON TAGS 39/40-HULLS 4667/4668 MAIN AND AUX. CENTRIFUGAL PUMPS AND MOTORS; MADE FOR SEA WATER/SALT WATER APPLICATION, thread_direction: RIGHT-HAND, fabrication_method: MACHINED, nominal_thread_size: 12.700 MILLIMETERS MM, nominal_tube_outside_diameter: 18.0 MILLIMETERS MM.

This part is cataloged in the U.S. Government catalog under NSN 4730-01-336-5338, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
343-126-3 ITEM11
NSN: 4730-01-336-5338
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 5Z608 — MOHN FRANK HOUSTON INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
special_featuresUSED ON TAGS 39/40-HULLS 4667/4668 MAIN AND AUX. CENTRIFUGAL PUMPS AND MOTORS; MADE FOR SEA WATER/SALT WATER APPLICATION
thread_directionRIGHT-HAND
fabrication_methodMACHINED
nominal_thread_size12.700 MILLIMETERS MM
nominal_tube_outside_diameter18.0 MILLIMETERS MM
NSN4730-01-336-5338
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 343-126-3 ITEM11 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 12.700 MILLIMETERS MM
•
MATERIAL: STEEL OVERALL
•
FABRICATION METHOD: MACHINED
•
NOMINAL TUBE OUTSIDE DIAMETER: 18.0 MILLIMETERS MM
TECHNICAL CHARACTERISTICS
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE12.700 MILLIMETERS MM
SPECIAL FEATURESUSED ON TAGS 39/40-HULLS 4667/4668 MAIN AND AUX. CENTRIFUGAL PUMPS AND MOTORS; MADE FOR SEA WATER/SALT WATER APPLICATION
MATERIALSTEEL OVERALL
FABRICATION METHODMACHINED
NOMINAL TUBE OUTSIDE DIAMETER18.0 MILLIMETERS MM
SUBSTITUTES & CROSS-REFERENCES 1
143529Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 343-126-3 ITEM11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 343-126-3 ITEM11?
343-126-3 ITEM11 is a NUT,TUBE COUPLING.
What parts can replace 343-126-3 ITEM11?
There is 1 known substitute for 343-126-3 ITEM11: 143529. Substitute compatibility should be verified for your specific system.
What is the NSN for 343-126-3 ITEM11?
343-126-3 ITEM11 is cataloged in the U.S. Government catalog under NSN 4730-01-336-5338. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 343-126-3 ITEM11