PartsTable
Technical Data Sheet
Download PDF

342517 — CLUTCH ASSEMBLY,FRICTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

342517: CLUTCH ASSEMBLY,FRICTION.

The CLUTCH ASSEMBLY,FRICTION is a the manufacturer industrial component. Key specifications include special_features: DESCRIPTION - HDP40-50, end_item_identification: HERCULES 50K WINCH, part_name_assigned_by_controlling_agency: CLUTCH. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-458-7699, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
342517
NSN: 5330-01-458-7699
NIINs: 014587699, 017172311
FSC: 5330 — Packing and Gasket Materials
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
special_featuresDESCRIPTION - HDP40-50
end_item_identificationHERCULES 50K WINCH
part_name_assigned_by_controlling_agencyCLUTCH
NSN5330-01-458-7699
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 342517 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.125 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.312 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.125 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.312 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
135840Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
135788 ITEM 8Reference document
Same NSN cross-reference
Reference document — Secondary reference
135861 ITEM 8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 342517?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 342517?
342517 is a CLUTCH ASSEMBLY,FRICTION.
What parts can replace 342517?
There are 3 known substitutes for 342517: 135840, 135788 ITEM 8, 135861 ITEM 8. Substitute compatibility should be verified for your specific system.
What is the NSN for 342517?
342517 is cataloged in the U.S. Government catalog under NSN 5330-01-458-7699. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 342517