PartsTable
Technical Data Sheet
Download PDF

342211 — SEAT,SPRING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

342211: SEAT,SPRING.

The SEAT,SPRING is a the manufacturer industrial component. Key specifications include phase: THREE INPUT, duty_cycle: CONTINUOUS, temp_rating: 40.0 OPERATING CELSIUS AND 65.0 AMBIENT CELSIUS, power_rating: 0.0100 HORSEPOWER OUTPUT, winding_type: SYNCHRONOUS, overall_width: 1.650 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-111-5128, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
342211
NSN: 5330-00-111-5128
NIINs: 001115128, 001184196, 003204428, 005388376, 014496390
FSC: 5330 — Packing and Gasket Materials
CAGE: 56152 — ELDER AND CO (USA)
SPECIFICATIONS
phaseTHREE INPUT
duty_cycleCONTINUOUS
temp_rating40.0 OPERATING CELSIUS AND 65.0 AMBIENT CELSIUS
power_rating0.0100 HORSEPOWER OUTPUT
winding_typeSYNCHRONOUS
overall_width1.650 INCHES IN
cooling_methodNONVENTILATED
overall_height1.650 INCHES IN
overall_length3.357 INCHES IN
shaft_diameter0.1560 INCHES NOMINAL SINGLE END IN
teeth_quantity6 SINGLE END
mounting_methodPAD
NSN5330-00-111-5128
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 342211 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.006 INCHES MINIMUM AND 0.008 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 9
•
HOLE DIAMETER: 0.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.006 INCHES MINIMUM AND 0.008 INCHES MAXIMUM IN
OVERALL LENGTH7.980 INCHES NOMINAL IN
OVERALL WIDTH6.550 INCHES NOMINAL IN
BOLT HOLE QUANTITY9
SPECIAL FEATURES1 BOLT HOLE AT 0.530 INS AND 1 BOLT AT 0.380
HOLE DIAMETER0.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 2
D3NN7B326ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
L31037Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 342211?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 342211?
342211 is a SEAT,SPRING.
What parts can replace 342211?
There are 2 known substitutes for 342211: D3NN7B326A, L31037. Substitute compatibility should be verified for your specific system.
What is the NSN for 342211?
342211 is cataloged in the U.S. Government catalog under NSN 5330-00-111-5128. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 342211