PartsTable
Technical Data Sheet
Download PDF

342-7067317-A4 — MAGNET,PERMANENT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

342-7067317-A4: MAGNET,PERMANENT.

The MAGNET,PERMANENT is a the manufacturer industrial component. Key specifications include shape: RECTANGULAR, material: NICKEL ALLOY, face_size: 3.000, overall_width: 1.500 INCHES NOMINAL IN, overall_height: 0.880 INCHES NOMINAL IN, overall_length: 3.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-500-0674, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
342-7067317-A4
NSN: 5340-01-500-0674
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
shapeRECTANGULAR
materialNICKEL ALLOY
face_size3.000
overall_width1.500 INCHES NOMINAL IN
overall_height0.880 INCHES NOMINAL IN
overall_length3.000 INCHES NOMINAL IN
overall_diameter1.250 INCHES NOMINAL IN
end_item_identificationUSED ON THE LOS ANGELES CLASS CNN
NSN5340-01-500-0674
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 342-7067317-A4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.250 INCHES NOMINAL IN
•
FACE SIZE: 3.000
•
SHAPE: RECTANGULAR
•
MATERIAL: NICKEL ALLOY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.880 INCHES NOMINAL IN
OVERALL DIAMETER1.250 INCHES NOMINAL IN
FACE SIZE3.000
SHAPERECTANGULAR
OVERALL LENGTH3.000 INCHES NOMINAL IN
OVERALL WIDTH1.500 INCHES NOMINAL IN
END ITEM IDENTIFICATIONUSED ON THE LOS ANGELES CLASS CNN
MATERIALNICKEL ALLOY
SUBSTITUTES & CROSS-REFERENCES 1
7067317Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 342-7067317-A4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 342-7067317-A4?
342-7067317-A4 is a MAGNET,PERMANENT.
What parts can replace 342-7067317-A4?
There is 1 known substitute for 342-7067317-A4: 7067317. Substitute compatibility should be verified for your specific system.
What is the NSN for 342-7067317-A4?
342-7067317-A4 is cataloged in the U.S. Government catalog under NSN 5340-01-500-0674. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 342-7067317-A4