PartsTable
Technical Data Sheet
Download PDF

342-0143-00 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

342-0143-00: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.147 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN, thread_length: 0.214 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, screw_material: COPPER ALLOY, fastener_length: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-151-0732, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
342-0143-00
NSN: 5305-00-151-0732
FSC: 5305 — Screws
CAGE: 95105 — ROCKWELL COLLINS, INC. DIV COLLINS AEROSPACE - MISSION SYSTEMS (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.147 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
thread_length0.214 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.086 INCHES IN
minimum_tensile_strength57000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch56
NSN5305-00-151-0732
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 342-0143-00 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.214 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: COPPER ALLOY
•
MINIMUM TENSILE STRENGTH: 57000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.214 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALCOPPER ALLOY
MINIMUM TENSILE STRENGTH57000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SUBSTITUTES & CROSS-REFERENCES 8
505B2R4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
20202 BLK.OXIDEReference document
Same NSN cross-reference
Reference document — Secondary reference
P342-0143-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
227306Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
20202 BLK.OXIDEADXReference document
Same NSN cross-reference
Reference document — Secondary reference
AN505B2R4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 342-0143-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 342-0143-00?
342-0143-00 is a SCREW,MACHINE.
What parts can replace 342-0143-00?
There are 8 known substitutes for 342-0143-00: 505B2R4, 20202 BLK.OXIDE, P342-0143-00 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 342-0143-00?
342-0143-00 is cataloged in the U.S. Government catalog under NSN 5305-00-151-0732. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 342-0143-00