PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 342-0085-000
342-0085-000 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, thread_length: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316, fastener_length: 1.250 INCHES MINIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-402-5788, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
342-0085-000
NSN: 5305-00-402-5788
FSC: 5305
CAGE: 94033 — CARDWELL CONDENSER CORP LAPOINTE-ADMIRAL DIV (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
thread_length1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
fastener_length1.250 INCHES MINIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV)
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentPASSIVATE
NSN5305-00-402-5788
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 342-0085-000 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH LBS
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SCREW MATERIAL: STEEL CORROSION RESISTING OR STEEL
•
THREAD CLASS: 2A A
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
•
THREAD QUANTITY PER INCH: 32
•
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
NOMINAL THREAD DIAMETER0.164 INCHES IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SCREW MATERIALSTEEL CORROSION RESISTING OR STEEL
THREAD CLASS2A A
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
THREAD QUANTITY PER INCH32
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
FASTENER LENGTH1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
HEAD STYLEPAN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
639122-415Interchangeable
interchangeable cross-reference
interchangeable
SCPP82CP36Interchangeable
interchangeable cross-reference
interchangeable
NAS1635-08-18Interchangeable
interchangeable cross-reference
interchangeable
22272Interchangeable
interchangeable cross-reference
interchangeable
MS51959-50Interchangeable
interchangeable cross-reference
interchangeable
22272ADXInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 342-0085-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 342-0085-000?
342-0085-000 is a SCREW,MACHINE.
What parts can replace 342-0085-000?
There are 14 known substitutes for 342-0085-000: 639122-415, SCPP82CP36, NAS1635-08-18 and 11 more. Substitute compatibility should be verified for your specific system.
Is 342-0085-000 still available?
342-0085-000 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 342-0085-000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026