The Milling Machine,horizontal,unive, cataloged under National Stock Number 3417-00-903-3770, is classified within Federal Supply Class 3417 (No Item Name Available) of the Metalworking Machinery (continued) group. The primary manufacturer of record is Cincinnati Machine Co. Government technical data includes 19 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3417-00-903-3770 |
| Primary Part Number | 188011 |
| Item Name | Milling Machine,horizontal,unive |
| FSC / FSG | 3417 / 34 — No Item Name Available |
| Manufacturer | Cincinnati Machine Co |
| Status | ACTIVE |
| Voltage in Volts | 220.0 |
| Quantity | 2 |
| Phase | THREE |
| Frequency in Hertz | 60.0 |
| Electric Motor Horsepower Rating | 5.000 |
| Current Rating in Amps | 15.0 |
| Spindle Cross Adjustment | 27.000 INCHES NOMINAL IN |
| Length | 56.500 INCHES NOMINAL IN |
| Table Vertical Travel | 18.000 INCHES NOMINAL IN |
| Feed Type | POWER |
| Table Cross Travel | 10.000 INCHES NOMINAL IN |
| Maximum Distance From Spindle Center to Table Top | 18.000 INCHES IN |
| Table Longitudinal Travel | 28.000 INCHES NOMINAL IN |
| Furnished Items and Quantity | 11 ARBORS,1 EA,STYLE1 7/8 BY 10IN.,STYLE A 1 BY 18IN.,STYLE B 7/8 BY 31/2IN.,STYLE B 1 BY 3 1/2IN.,STYLE B 1BY 18IN.,STYLE B 1 1/4 BY 18IN.,STYLE C 1/2 BY 5/8IN.,STYLE C 3/4 BY 5/8IN.,STYLE C 1 BY 7/8IN.,STYLE C 1 1/4 BY 7/8IN.,STYLE C 1 1/2 BY 7/8IN.;1 CARTRIDGE NO. 50 N.S. TAPER;1 EA COLLET,C SERTES 1/2IN.,9/16IN.,5/8IN.,11/16IN.,3/4IN.;2 CHUCKS,1 EA,NO.50 N.S. TAPER SPRING,6IN. 6JAW UNIVERSAL;2 HOLDERS COLLET NO.50 TAPER TO NO.2 MORSE TAPER,NO.50 TAPER TO NO.5 BROWN AND SHARP; 5SLEEVES,1 EA,REDUCING NO.50 TAPER TO NO.3 MORSE,REDUCING NO.50 TAPER TO NO.4MORSE,REDUCING NO.50 TAPER TO NO.5 MORSE,REDUCING NO.50 TAPER TO NO.7 B.AND S.,REDUCING NO.50 TAPER TO NO.9 B.AND S.,1 VISE,NO.5 SWIVEL,1 VISE,UNIVERSALTOOLMAKERS IN |
| Width | 12.000 INCHES NOMINAL IN |
| Current Type | AC |
| Power Source | ELECTRIC MOTOR |
| Table Swivel Direction and Adjustment in Deg | 46.0 EACH SIDE |
| Mounting Type | FLOOR |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 188011 | Cincinnati Machine Co (USA) |
| MILM80044TYIISZ2 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 3417-2122-2834 | Defense Supply Center Richmond Industrial Plant Equipment /dla/ (USA) |
| MILM80044TYIISZ2CL2 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 3417-00-903-3770 is a Milling Machine,horizontal,unive, manufactured by Cincinnati Machine Co, classified under FSC 3417 (No Item Name Available). Status: active.
NSN 3417-00-903-3770 has 4 cross-referenced part numbers: 188011 (Cincinnati Machine Co), MILM80044TYIISZ2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 3417-2122-2834 (Defense Supply Center Richmond Industrial Plant Equipment /dla/), MILM80044TYIISZ2CL2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 12 known substitutes for 3417-00-903-3770: 3417-00-196-7342, 3417-00-196-7343, 3417-00-233-6812 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for 188011: Voltage in Volts: 220.0; Quantity: 2; Special Features: 3 HP INDEPENDENT OVERHEAD SPINDLELEVER SHIFT 3IN. ADJUSTING SPINDLE WITH NO.9 BROWN AND SHARP TAPER NOSE AND 8 SPEEDS;90 DEG SWIVEL HOUSING FOR I.O.S.;SHORT AND LONG LEAD ATTACHMENTS;SHORT AND LONG LEAD DRIVING MECHANISMS;16IN. CIRCULAR MILLING TABLE;INDEXING FOR CIRCULAR MILLING TABLE;POWER FEED FOR CIRCULAR MILLING TABLE;SLOTTING ATTACHMENT IN; Phase: THREE. 20 total characteristics are documented in the Federal Logistics Information System.