The Lathe,engine, cataloged under National Stock Number 3416-01-479-0583, is classified within Federal Supply Class 3416 (Lathes) of the Metalworking Machinery (continued) group. The manufacturer of record is Caro, Inc. Dba South Bend Lathe. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-01-479-0583 |
| Primary Part Number | TURN-NADO 18X60 EVS |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — Lathes |
| Manufacturer | Caro, Inc. Dba South Bend Lathe |
| Status | ACTIVE |
| Rated Swing Through Open Gap | 28.000 INCHES NOMINAL IN |
| Phase | THREE |
| Swing Over Cross Slide | 11.000 INCHES NOMINAL IN |
| Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| Frequency in Hertz | 60.0 |
| Current Type | AC |
| Thread Quantity Range | +2.0 TO 72.0 PER INCH |
| Thread Change Quantity | 38 OR 40 |
| Design Type | SCREW |
| Carriage Quantity | 1 |
| Headstock Drive Type | GEARED HEAD |
| Voltage in Volts | 230.0 |
| Rated Swing Over Closed Gap | 20.000 INCHES NOMINAL IN |
| Hole Diameter Through Spindle | 3.062 INCHES NOMINAL IN |
| Accessory Components and Quantity | HEADSTOCK W/FOUR SPEED RANGES (18-180RPMS, LOW RANGE), AND (180-1800RPMS, HIGH RANGE), (1EA);LED INDICATOR (1EA);0.125HP COOLANT, 115VAC (1EA) VAC |
| Electric Motor Quantity | 1 |
| Carriage Cross Feed Operation Method | HAND AND POWER |
| Actual Swing Over Closed Gap | 18.000 INCHES NOMINAL IN |
| Spindle Speed Range in RPM | +18.0 TO 1800.0 |
| Electric Motor Horsepower Rating | 10.000 |
| Spindle Speed Quantity | 4 |
| Center to Center Distance | 60.000 INCHES NOMINAL IN |
| Mounting Type | FLOOR |
| Purpose for Which Designed | GENERAL |
| Performance Type | STANDARD DUTY |
| Actual Swing Through Open Gap | 28.000 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 18-60EVS | Caro, Inc. Dba South Bend Lathe (USA) |
| TURN-NADO 18X60 EVS PRIMARY | Caro, Inc. Dba South Bend Lathe (USA) |
NSN 3416-01-479-0583 is a Lathe,engine, manufactured by Caro, Inc. Dba South Bend Lathe, classified under FSC 3416, Lathes. Status: active.
NSN 3416-01-479-0583 has 2 manufacturer part numbers on file: 18-60EVS (Caro, Inc. Dba South Bend Lathe), TURN-NADO 18X60 EVS (Caro, Inc. Dba South Bend Lathe).
Key specifications for TURN-NADO 18X60 EVS: Rated Swing Through Open Gap: 28.000 INCHES NOMINAL IN; Phase: THREE; Swing Over Cross Slide: 11.000 INCHES NOMINAL IN; Carriage Longitudinal Feed Operation Method: HAND AND POWER. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.