The Lathe,engine, cataloged under National Stock Number 3416-01-475-1178, is classified within Federal Supply Class 3416 (Lathes) of the Metalworking Machinery (continued) group. The manufacturer of record is Caro, Inc. Dba South Bend Lathe. Government technical data includes 25 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-01-475-1178 |
| Primary Part Number | SB1012F |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — Lathes |
| Manufacturer | Caro, Inc. Dba South Bend Lathe |
| Status | ACTIVE |
| Phase | THREE |
| Swing Over Cross Slide | 8.375 INCHES NOMINAL IN |
| Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| Frequency in Hertz | 60.0 |
| Current Type | AC |
| Thread Quantity Range | +2.0 TO 72.0 PER INCH |
| Thread Change Quantity | 45 |
| Design Type | SCREW |
| Carriage Quantity | 1 |
| Headstock Drive Type | GEARED HEAD |
| Voltage in Volts | 230.0 |
| Rated Swing | 14.000 INCHES NOMINAL IN |
| Hole Diameter Through Spindle | 2.062 INCHES NOMINAL IN |
| Accessory Components and Quantity | HEADSTOCK W/TWO SPEED RANGE (20-400RPM LOW RANGE) AND (400-2500RPM HIGH RANGE)1EA;LED DISPLAY INDICATOR 1EA; RPM |
| Electric Motor Quantity | 1 |
| Carriage Cross Feed Operation Method | HAND AND POWER |
| Actual Swing Over Closed Gap | 21.000 INCHES NOMINAL IN |
| Spindle Speed Range in RPM | +20.0 TO 400.0 |
| Electric Motor Horsepower Rating | 5.000 |
| Actual Swing Over Bed | 14.812 INCHES NOMINAL IN |
| Spindle Speed Quantity | 2 |
| Center to Center Distance | 40.000 INCHES NOMINAL IN |
| Mounting Type | FLOOR |
| Purpose for Which Designed | GENERAL |
| Performance Type | STANDARD DUTY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 14-40VS | Caro, Inc. Dba South Bend Lathe (USA) |
| TURN-NADO 14X40VS | Caro, Inc. Dba South Bend Lathe (USA) |
| SB1012F PRIMARY | Caro, Inc. Dba South Bend Lathe (USA) |
| Reference | Meaning |
|---|---|
| SV1012F | 3/9 Design control — primary reference Caro, Inc. Dba South Bend Lathe |
NSN 3416-01-475-1178 is a Lathe,engine, manufactured by Caro, Inc. Dba South Bend Lathe, classified under FSC 3416, Lathes. Status: active.
NSN 3416-01-475-1178 has 3 manufacturer part numbers on file: 14-40VS (Caro, Inc. Dba South Bend Lathe), TURN-NADO 14X40VS (Caro, Inc. Dba South Bend Lathe), SB1012F (Caro, Inc. Dba South Bend Lathe).
Key specifications for SB1012F: Phase: THREE; Swing Over Cross Slide: 8.375 INCHES NOMINAL IN; Carriage Longitudinal Feed Operation Method: HAND AND POWER; Frequency in Hertz: 60.0. 25 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.