The Lathe,engine, cataloged under National Stock Number 3416-01-448-3041, is classified within Federal Supply Class 3416 (Lathes) of the Metalworking Machinery (continued) group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-01-448-3041 |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — Lathes |
| Status | ACTIVE |
| Phase | THREE |
| Swing Over Cross Slide | 8.000 INCHES NOMINAL IN |
| Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| Frequency in Hertz | 60.0 |
| Current Type | AC |
| Thread Quantity Range | +2.0 TO 64.0 PER INCH |
| Thread Change Quantity | 45 |
| Design Type | PLAIN |
| Headstock Drive Type | GEARED HEAD |
| Voltage in Volts | 230.0 AND 460.0 |
| Rated Swing | 15.000 INCHES NOMINAL IN |
| Hole Diameter Through Spindle | 2.000 INCHES NOMINAL IN |
| Electric Motor Quantity | 1 |
| Carriage Cross Feed Operation Method | HAND AND POWER |
| Spindle Speed Range in RPM | +50.0 TO 1800.0 |
| Electric Motor Horsepower Rating | 5.000 |
| Actual Swing Over Bed | 15.000 INCHES NOMINAL IN |
| Spindle Speed Quantity | 12 |
| Center to Center Distance | 30.000 INCHES NOMINAL IN |
| Mounting Type | FLOOR |
| Purpose for Which Designed | GENERAL |
| Performance Type | STANDARD DUTY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 8044VSJ | 5/9 Secondary reference Clausing Industrial Inc Dba Clausing Corp |
| MIL-L-23249TYISZ1508 | 2/2 Government specification standardization U.S. Government activity |
| MIL-L-23249 | 4/1 Identification reference U.S. Government activity |
NSN 3416-01-448-3041 is a Lathe,engine, classified under FSC 3416, Lathes. Status: active.
Key specifications for 3416-01-448-3041: Phase: THREE; Swing Over Cross Slide: 8.000 INCHES NOMINAL IN; Carriage Longitudinal Feed Operation Method: HAND AND POWER; Frequency in Hertz: 60.0. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.