The Lathe,engine, cataloged under National Stock Number 3416-01-385-3998, is classified within Federal Supply Class 3416 (Lathes) of the Metalworking Machinery (continued) group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-01-385-3998 |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — Lathes |
| Status | ACTIVE |
| Phase | SINGLE |
| Swing Over Cross Slide | 6.700 INCHES NOMINAL IN |
| Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| Frequency in Hertz | 60.0 |
| Current Type | AC |
| Thread Quantity Range | +9.0 TO 64.0 PER INCH |
| Thread Change Quantity | 15 |
| Design Type | SCREW |
| Carriage Quantity | 1 |
| Headstock Drive Type | DIRECT PULLEY, BACK GEARED OR GEARED HEAD |
| Voltage in Volts | 115.0 |
| Carriage Feed Change Quantity | 15 |
| Rated Swing | 11.000 INCHES NOMINAL IN |
| Accessory Components and Quantity | 1 VEE-BED; 1 HEADSTOCK; 1 TAILSTOCK; 1 QUICK CHANGE GEAR BOX; 1 LONGITUDINAL CROSS AND TOP SLIDES; 1 SINGLE TOOLPOST; 1 LEADSCREW; 1 FEED SHAFT; 1 MT5 CENTER; 1 MT2 CENTER; 1 LATHE DOG; 1 DOG PIN; 1 SET OF WRENCHES; 1 GREASE GUN; 1 INSTRUCTION BOOK AND SERVICE PARTS LIST |
| Electric Motor Quantity | 1 |
| Carriage Cross Feed Operation Method | HAND AND POWER |
| Spindle Speed Range in RPM | +55.0 TO 2200.0 |
| Electric Motor Horsepower Rating | 1.300 |
| Hollow Spindle Hole Size | 1.400 INCHES NOMINAL IN |
| Actual Swing Over Bed | 11.000 INCHES NOMINAL IN |
| Spindle Speed Quantity | 8 |
| Center to Center Distance | 25.600 INCHES NOMINAL IN |
| Mounting Type | BENCH |
| Purpose for Which Designed | TOOLROOM |
| Performance Type | LIGHT DUTY |
| Reference Number Differentiating Characteristics | DIFFERENTIATED BY FEAT REQUIREMENTS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| EMMAX-ACC | 5/9 Secondary reference Doall Industrial Supply |
| 582-1PP | 5/9 Secondary reference Doall Industrial Supply |
| MAXIMAT SUPER 11 | 5/9 Secondary reference Doall Industrial Supply |
| BRM500582A | 3/9 Design control — primary reference Doall Industrial Supply |
NSN 3416-01-385-3998 is a Lathe,engine, classified under FSC 3416, Lathes. Status: active.
Key specifications for 3416-01-385-3998: Phase: SINGLE; Swing Over Cross Slide: 6.700 INCHES NOMINAL IN; Carriage Longitudinal Feed Operation Method: HAND AND POWER; Frequency in Hertz: 60.0. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.