The Lathe,engine, cataloged under National Stock Number 3416-01-339-1239, is classified within Federal Supply Class 3416 (Lathes) of the Metalworking Machinery (continued) group. The manufacturer of record is Makino Inc. Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-01-339-1239 |
| Primary Part Number | 15E-272 |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — Lathes |
| Manufacturer | Makino Inc |
| Status | ACTIVE |
| Phase | THREE |
| Swing Over Cross Slide | 9.500 INCHES NOMINAL IN |
| Carriage Longitudinal Feed Operation Method | POWER |
| Frequency in Hertz | 60.0 |
| Current Type | AC |
| Thread Quantity Range | +2.0 TO 112.0 PER INCH |
| Thread Change Quantity | 48 |
| Design Type | SCREW |
| Carriage Quantity | 3 |
| Headstock Drive Type | DIRECT PULLEY, BACK GEARED |
| Voltage in Volts | 230.0 |
| Rated Swing | 15.000 INCHES NOMINAL IN |
| Hole Diameter Through Spindle | 2.281 INCHES NOMINAL IN |
| Accessory Components and Quantity | 1 TAPER ATTACHMENT |
| Electric Motor Quantity | 1 |
| Carriage Cross Feed Operation Method | POWER |
| Spindle Speed Range in RPM | +45.0 TO 1800.0 |
| Electric Motor Horsepower Rating | 7.500 |
| Actual Swing Over Bed | 15.500 INCHES NOMINAL IN |
| Spindle Speed Quantity | 12 |
| Center to Center Distance | 30.000 INCHES NOMINAL IN |
| Mounting Type | FLOOR |
| Purpose for Which Designed | GENERAL |
| Performance Type | HEAVY DUTY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 15E-272 PRIMARY | Makino Inc (USA) |
NSN 3416-01-339-1239 is a Lathe,engine, manufactured by Makino Inc, classified under FSC 3416, Lathes. Status: active.
NSN 3416-01-339-1239 has 1 manufacturer part number on file: 15E-272 (Makino Inc).
Key specifications for 15E-272: Phase: THREE; Swing Over Cross Slide: 9.500 INCHES NOMINAL IN; Carriage Longitudinal Feed Operation Method: POWER; Frequency in Hertz: 60.0. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.