The Lathe,engine, cataloged under National Stock Number 3416-01-264-2697, is classified within Federal Supply Class 3416 (No Item Name Available) of the Metalworking Machinery (continued) group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-01-264-2697 |
| Primary Part Number | MIL-L-23249 |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Center to Center Distance | 40.000 INCHES NOMINAL IN |
| Thread Change Quantity | 93 |
| Frequency in Hertz | 60.0 |
| Thread Quantity Range | +2.0 TO 72.0 PER INCH |
| Actual Swing Over Bed | 16.000 INCHES NOMINAL IN |
| Electric Motor Quantity | 1 |
| Voltage in Volts | 220.0 AND 440.0 |
| Rated Swing | 16.000 INCHES NOMINAL IN |
| Headstock Drive Type | DIRECT PULLEY, BACK GEARED |
| Carriage Cross Feed Operation Method | HAND AND POWER |
| Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| Phase | THREE |
| Spindle Speed Range in RPM | +40.0 TO 2000.0 |
| Carriage Quantity | 1 |
| Spindle Speed Quantity | 18 |
| Swing Over Cross Slide | 10.000 INCHES NOMINAL IN |
| Design Type | SCREW |
| Electric Motor Horsepower Rating | 10.000 |
| Purpose for Which Designed | TOOLROOM |
| Accessory Components and Quantity | 1 FULL LENGTH REAR SPLASH GUARD; 1 10.0 IN. DIA. DOGPLATE; 1 NO. 2 STANDARD TOOLPOST; 2 NO. 4 MORSE TAPER DEAD CENTERS; 1 NO. 4 MORSE TAPER SPIONDLE SLEEVE; 1 OPERATORS HANDBOOK; 1 INSPECTION REPORT; STANDARD 115 VOLT ELECTRIC CONTROLS AND CONTROL PANEL; WRENCHES,KEYS,SPARE PINS IN |
| Performance Type | STANDARD DUTY |
| Mounting Type | FLOOR |
| Current Type | AC |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-L-23249 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 1640 | Omatech Service Ltd (CAN) |
| 3416-2111-6040 | Defense Supply Center Richmond Industrial Plant Equipment /dla/ (USA) |
NSN 3416-01-264-2697 is a Lathe,engine, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 3416 (No Item Name Available). Status: active.
NSN 3416-01-264-2697 has 3 cross-referenced part numbers: MIL-L-23249 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 1640 (Omatech Service Ltd), 3416-2111-6040 (Defense Supply Center Richmond Industrial Plant Equipment /dla/).
There are 12 known substitutes for 3416-01-264-2697: 5935-00-199-0275, 4820-00-287-3952, 4820-00-287-3953 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-L-23249: Center to Center Distance: 40.000 INCHES NOMINAL IN; Thread Change Quantity: 93; Frequency in Hertz: 60.0; Thread Quantity Range: +2.0 TO 72.0 PER INCH. 24 total characteristics are documented in the Federal Logistics Information System.