The Lathe,engine, cataloged under National Stock Number 3416-01-245-8383, is classified within Federal Supply Class 3416 (Lathes) of the Metalworking Machinery (continued) group. The manufacturer of record is Makino Inc. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-01-245-8383 |
| Primary Part Number | 12C-747 |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — Lathes |
| Manufacturer | Makino Inc |
| Status | ACTIVE |
| Phase | SINGLE/THREE |
| Swing Over Cross Slide | 9.500 INCHES NOMINAL IN |
| Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| Frequency in Hertz | 60.0 |
| Current Type | AC |
| Thread Quantity Range | +2.0 TO 112.0 PER INCH |
| Thread Change Quantity | 48 |
| Design Type | SCREW |
| Carriage Quantity | 1 |
| Headstock Drive Type | GEARED HEAD OR STEP CONE PULLEY, BACK GEARED |
| Voltage in Volts | 110.0 AND 220.0 |
| Carriage Feed Change Quantity | 48 |
| Rated Swing | 15.500 INCHES NOMINAL IN |
| Hole Diameter Through Spindle | 4.125 INCHES NOMINAL IN |
| Electric Motor Quantity | 2 |
| Carriage Cross Feed Operation Method | HAND AND POWER |
| Spindle Speed Range in RPM | +45.0 TO 1800.0 |
| Electric Motor Horsepower Rating | 7.500 |
| Spindle Speed Quantity | 12 |
| Center to Center Distance | 30.000 INCHES NOMINAL IN |
| Mounting Type | FLOOR |
| Purpose for Which Designed | TOOLROOM |
| Performance Type | STANDARD DUTY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
NSN 3416-01-245-8383 is a Lathe,engine, manufactured by Makino Inc, classified under FSC 3416, Lathes. Status: active.
NSN 3416-01-245-8383 has 2 manufacturer part numbers on file: 15-02 (Makino Inc), 12C-747 (Makino Inc).
3 possible matches (shared part number, not a government interchangeability claim): 3416-01-264-2697, 3416-01-447-2320, 3416-01-448-3041. Verify interchangeability with system specifications before substitution.
Key specifications for 12C-747: Phase: SINGLE/THREE; Swing Over Cross Slide: 9.500 INCHES NOMINAL IN; Carriage Longitudinal Feed Operation Method: HAND AND POWER; Frequency in Hertz: 60.0. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.