The Lathe,engine, cataloged under National Stock Number 3416-01-030-8195, is classified within Federal Supply Class 3416 (Lathes) of the Metalworking Machinery (continued) group. The manufacturer of record is Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate. Government technical data includes 25 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-01-030-8195 |
| Primary Part Number | 1334-MIL |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — Lathes |
| Manufacturer | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate |
| Status | ACTIVE |
| Phase | SINGLE |
| Swing Over Cross Slide | 7.750 INCHES NOMINAL IN |
| Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| Frequency in Hertz | 60.0 |
| Current Type | AC |
| Thread Quantity Range | +4.0 TO 80.0 PER INCH |
| Thread Change Quantity | 48 |
| Design Type | SCREW |
| Carriage Quantity | 1 |
| Headstock Drive Type | STEP CONE PULLEY, BACK GEARED |
| Voltage in Volts | 115.0 AND 230.0 |
| Carriage Feed Change Quantity | 48 |
| Rated Swing | 13.000 INCHES NOMINAL IN |
| Hole Diameter Through Spindle | 1.375 INCHES NOMINAL IN |
| Accessory Components and Quantity | 2 NO.3 MORSE TAPER LATHE CENTERS,3 CHUCKS,1 FLEXIBLE RUBBER COLLET SET,5 BENT TAIL DOG LATHES,1 DOG LATHE,1 DRIVE PLATE,1 FACEPLATE,1 METRIC TRANSPOSING GEAR LATHE,1 BORING BAR CUTTING TOOL HOLDER,3 CUTTING-OFF CUTTING TOOL HOLDERS,3 TURNING CUTTING TOOL HOLDERS,1 V-FORM THREADING TOOL HOLDER,1 KNURLING TOOLS,4 COLLET PLUGS,2 LATHE RESTS,1 LATHE CENTER SLEEVE,1 MICROMETER LATHE CARRIAGE STOP,1 TELESCOPIC LATHE TAPEP ATTACHMENT V |
| Electric Motor Quantity | 1 |
| Carriage Cross Feed Operation Method | HAND AND POWER |
| Spindle Speed Range in RPM | +53.0 TO 1800.0 |
| Electric Motor Horsepower Rating | 1.500 |
| Actual Swing Over Bed | 13.000 INCHES NOMINAL IN |
| Spindle Speed Quantity | 12 |
| Center to Center Distance | 30.000 INCHES MINIMUM IN |
| Mounting Type | FLOOR |
| Purpose for Which Designed | GENERAL |
| Performance Type | STANDARD DUTY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 1334-MIL PRIMARY | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA) |
| Reference | Meaning |
|---|---|
| 3416-2111-3034 | 6/9 Informative reference only U.S. Government activity |
| 1334-MIL | 5/9 Secondary reference Omatech Service Ltd |
NSN 3416-01-030-8195 is a Lathe,engine, manufactured by Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate, classified under FSC 3416, Lathes. Status: active.
NSN 3416-01-030-8195 has 1 manufacturer part number on file: 1334-MIL (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate).
Key specifications for 1334-MIL: Phase: SINGLE; Swing Over Cross Slide: 7.750 INCHES NOMINAL IN; Carriage Longitudinal Feed Operation Method: HAND AND POWER; Frequency in Hertz: 60.0. 25 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.