PartsTable TECHNICAL DATA SHEET
NSN 3416-00-869-2345Government record, cited

Lathe, Engine3416-00-869-2345

NSN 3416-00-869-2345 · NIIN 008692345 · Part number 610-1610
Monarch Machine Tool Co the · FSC 3416 — Lathes · FSG 34 — Metalworking Machinery (continued) · CAGE 41292
Government record, cited
NSN 3416-00-869-2345 — this item is cataloged by the U.S. Government under National Stock Number 3416-00-869-2345. Manufacturer of record part number: 610-1610.
Also searched as  3416-00-869-2345 · 3416008692345 · NIIN 008692345 · 00-869-2345 · FSC 3416 Lathes · CAGE 41292 · 610-1610 · MILL23257 · 3416-2111-6054
Nearby stock numbers  ·
Features
  • Lathe,engine — FSC 3416
  • Phase: THREE
  • Swing Over Cross Slide: 10.000 INCHES NOMINAL IN
  • Carriage Longitudinal Feed Operation Method: POWER
  • Frequency in Hertz: 60.0
  • Current Type: AC
  • Thread Quantity Range: +2.0 TO 112.0 PER INCH
  • Thread Change Quantity: 60
Identification
  • NSN: 3416-00-869-2345
  • NIIN: 008692345
  • FSC: 3416 — Lathes
  • FSG: 34 — Metalworking Machinery (continued)
  • Primary part number: 610-1610
  • Manufacturer: Monarch Machine Tool Co the
General Description

The Lathe,engine, cataloged under National Stock Number 3416-00-869-2345, is classified within Federal Supply Class 3416 (Lathes) of the Metalworking Machinery (continued) group. The manufacturer of record is Monarch Machine Tool Co the. Government technical data includes 25 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3416-00-869-2345
Primary Part Number610-1610
Item NameLathe,engine
FSC / FSG3416 / 34 — Lathes
ManufacturerMonarch Machine Tool Co the
StatusACTIVE
PhaseTHREE
Swing Over Cross Slide10.000 INCHES NOMINAL IN
Carriage Longitudinal Feed Operation MethodPOWER
Frequency in Hertz60.0
Current TypeAC
Thread Quantity Range+2.0 TO 112.0 PER INCH
Thread Change Quantity60
Design TypeSCREW
Carriage Quantity1
Headstock Drive TypeDIRECT PULLEY, BACK GEARED
Voltage in Volts460.0
Rated Swing16.000 INCHES NOMINAL IN
Hole Diameter Through Spindle2.000 INCHES NOMINAL IN
Accessory Components and Quantity1 SET ARMSTRONG TOOL HOLDERS,1 CHUCK,4-JAW,12 IN.,1 CHUCK,UNIVERSAL 3-JAW,10 IN.,1 SET COLLECTS,RUBBER FLEX,RANGE 1/16 IN. TO 1-3/8 IN.,1 COLLANT SYSTEM,1 FACEPLATE,15 IN.,1 FOLLOW REST,FLAT JAWS,3/4 IN. TO 3-1/2 IN. CAPACITY,2 HEADSTOCK CENTER,NO. 4 MORSE TAPER,1 HEAVY DUTY DRILL ADAPTER,1 JACOBS SPINDLE NOSE CHUCK,1 SET METRIC TRANSPOSING GEARS,RANGE .0016 TO .1055 MM PER REVOLUTIONS,1 MICROMETER CARRIAGE STOP,1 PIPE CENTER,NO. 4 MORSE TAPER,1 IN. TO 6 IN. CAPACITY,1 STEADY REST,PLAIN JAWS,3/4 IN. TO 4-1/2 IN. CAPACITY,1 4-1/2 1N. TO 8 IN. CAPACITY,1 EA TAILSTOCK,BUILT-IN ANTIFRICTION SPINDLE AND CENTER,1 TAPER ATTACHMENT,1 WORK LIGHT MTG MM
Departure From Cited DesignatorASHK,ELEC,FAAZ
Electric Motor Quantity1
Carriage Cross Feed Operation MethodHAND AND POWER
Nondefinitive Spec/std Data1610 SIZE
Spindle Speed Range in RPM+23.0 TO 1500.0
Electric Motor Horsepower Rating10.0
Spindle Speed Quantity24
Center to Center Distance54.000 INCHES NOMINAL IN
Mounting TypeFLOOR
Purpose for Which DesignedGENERAL
Performance TypeSTANDARD DUTY
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeN
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
3416-01-007-0144 POSSIBLE MATCH
LATHE,ENGINE
Possible match (shared part number)
3416-01-246-8068 POSSIBLE MATCH
LATHE,ENGINE
Possible match (shared part number)
Cross-Reference Index
Part NumberManufacturer
610-1610 PRIMARY Monarch Machine Tool Co the (USA)
Reference documents
ReferenceMeaning
MILL23257 4/1 Identification reference
U.S. Government activity
3416-2111-6054 6/9 Informative reference only
U.S. Government activity
Related Parts
3416-01-007-0144POSSIBLE MATCH
LATHE,ENGINE
3416-01-246-8068POSSIBLE MATCH
LATHE,ENGINE

Frequently Asked Questions

What is NSN 3416-00-869-2345?

NSN 3416-00-869-2345 is a Lathe,engine, manufactured by Monarch Machine Tool Co the, classified under FSC 3416, Lathes. Status: active.

What part numbers are listed for NSN 3416-00-869-2345?

NSN 3416-00-869-2345 has 1 manufacturer part number on file: 610-1610 (Monarch Machine Tool Co the).

What NSN replaces 3416-00-869-2345?

2 possible matches (shared part number, not a government interchangeability claim): 3416-01-007-0144, 3416-01-246-8068. Verify interchangeability with system specifications before substitution.

What are the specifications of 610-1610?

Key specifications for 610-1610: Phase: THREE; Swing Over Cross Slide: 10.000 INCHES NOMINAL IN; Carriage Longitudinal Feed Operation Method: POWER; Frequency in Hertz: 60.0. 25 specifications are documented in the U.S. Government catalog.

Is NSN 3416-00-869-2345 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com