The Lathe,engine, cataloged under National Stock Number 3416-00-528-8412, is classified within Federal Supply Class 3416 (No Item Name Available) of the Metalworking Machinery (continued) group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 25 verified specifications, sourced from the Federal Logistics Information System. This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the government interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-00-528-8412 |
| Primary Part Number | MILL23251 |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Center to Center Distance | 108.000 INCHES NOMINAL IN |
| Current Type | AC |
| Accessory Components and Quantity | PER MIL-STD 931 |
| Mounting Type | FLOOR |
| Electric Motor Quantity | 1 |
| Carriage Longitudinal Feed Operation Method | HAND OR POWER |
| Thread Quantity Range | +0.004 TO 0.160 PER INCH |
| Headstock Drive Type | GEARED HEAD |
| Hole Diameter Through Spindle | 2.188 INCHES NOMINAL IN |
| Voltage in Volts | 220.0 AND 440.0 |
| Carriage Cross Feed Operation Method | HAND OR POWER |
| Carriage Feed Change Quantity | 28 |
| Thread Change Quantity | 28 |
| Swing Over Cross Slide | 20.000 INCHES NOMINAL IN |
| Carriage Quantity | 1 |
| Spindle Speed Quantity | 16 |
| Phase | THREE |
| Spindle Speed Range in RPM | +8.0 TO 600.0 |
| Frequency in Hertz | 60.0 |
| Rated Swing | 32.000 INCHES NOMINAL IN |
| Actual Swing Over Bed | 33.500 INCHES NOMINAL IN |
| Performance Type | HEAVY DUTY |
| Design Type | SCREW |
| Electric Motor Horsepower Rating | 25.0 |
| Purpose for Which Designed | GENERAL |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MILL23251 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 3416-2113-3108 | Defense Supply Center Richmond Industrial Plant Equipment /dla/ (USA) |
NSN 3416-00-528-8412 is a Lathe,engine, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 3416 (No Item Name Available). Status: active.
NSN 3416-00-528-8412 has 2 cross-referenced part numbers: MILL23251 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 3416-2113-3108 (Defense Supply Center Richmond Industrial Plant Equipment /dla/).
There is 1 known substitute for 3416-00-528-8412: 3416-00-189-7831. Verify interchangeability with system specifications before substitution.
Key specifications for MILL23251: Center to Center Distance: 108.000 INCHES NOMINAL IN; Current Type: AC; Accessory Components and Quantity: PER MIL-STD 931; Mounting Type: FLOOR. 25 total characteristics are documented in the Federal Logistics Information System.