The Lathe,engine, cataloged under National Stock Number 3416-00-528-7903, is classified within Federal Supply Class 3416 (Lathes) of the Metalworking Machinery (continued) group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-00-528-7903 |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — Lathes |
| Status | ACTIVE |
| Distance Between Closed Centers | 96.000 INCHES NOMINAL IN |
| Phase | THREE |
| Swing Over Cross Slide | 19.500 INCHES NOMINAL IN |
| Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| Frequency in Hertz | 60.0 |
| Current Type | AC |
| Thread Quantity Range | +0.750 TO 46.000 PER INCH |
| Thread Change Quantity | 48 |
| Design Type | SCREW |
| Carriage Quantity | 1 |
| Headstock Drive Type | GEARED HEAD |
| Voltage in Volts | 220.0 AND 440.0 |
| Carriage Feed Change Quantity | 48 |
| Hole Diameter Through Spindle | 2.250 INCHES NOMINAL IN |
| Accessory Components and Quantity | NONE SPECIFIED |
| Electric Motor Quantity | 1 |
| Distance Between Open Centers | 156.000 INCHES NOMINAL IN |
| Carriage Cross Feed Operation Method | HAND AND POWER |
| Actual Swing Over Closed Gap | 30.500 INCHES NOMINAL IN |
| Spindle Speed Range in RPM | +3.25 TO 400.00 |
| Electric Motor Horsepower Rating | 25.0 |
| Spindle Speed Quantity | 16 |
| Mounting Type | FLOOR |
| Purpose for Which Designed | GENERAL |
| Performance Type | HEAVY DUTY |
| Reference Number Differentiating Characteristics | BTWJ,BTWK |
| Actual Swing Through Open Gap | 56.000 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 25-50 | 3/1 Design control — primary reference Makino Inc |
| 3416-2415-6156 | 6/9 Informative reference only U.S. Government activity |
NSN 3416-00-528-7903 is a Lathe,engine, classified under FSC 3416, Lathes. Status: active.
Key specifications for 3416-00-528-7903: Distance Between Closed Centers: 96.000 INCHES NOMINAL IN; Phase: THREE; Swing Over Cross Slide: 19.500 INCHES NOMINAL IN; Carriage Longitudinal Feed Operation Method: HAND AND POWER. 27 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.