The Lathe,engine, cataloged under National Stock Number 3416-00-449-7188, is classified within Federal Supply Class 3416 (Lathes) of the Metalworking Machinery (continued) group. The manufacturer of record is Caro, Inc. Dba South Bend Lathe. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-00-449-7188 |
| Primary Part Number | 5X12 |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — Lathes |
| Manufacturer | Caro, Inc. Dba South Bend Lathe |
| Status | ACTIVE |
| Phase | SINGLE |
| Frequency in Hertz | 60.0 |
| Current Type | AC |
| Carriage Quantity | 1 |
| Headstock Drive Type | GEARED HEAD |
| Voltage in Volts | 115.0 AND 230.0 |
| Carriage Feed Change Quantity | 57 |
| Rated Swing | 12.000 INCHES NOMINAL IN |
| Hole Diameter Through Spindle | 1.313 INCHES NOMINAL IN |
| Accessory Components and Quantity | 4 BELTS/V/;1 BUSHING,SPINDLE CTR.;2 CTRS.,TAILSTOCK,HEADSTOCK,NO.2 MORSE TAPER;1 CHUCK,LATHE,IND.,MED.DUTY,4 JAW,10 IN.W/WRENCH;1 CHUCK,LATHE,SCROLL SELF CTR.,MED.DUTY,3 JAW,UNIV.,W/REV.JAWS,6 IN.W/WRENCH;24 CUTTER BIT,TOOL HOLDER H-SPEED STEEL,UNFINISHED,SQ,5/16BY2-3/4 IN.;1 CUTTER BIT,TOOL HOLDER,UNFINISHED,BEVELED,1/8BY3/4BY6 IN.;3 CUTTER BIT,TOOL HOLDER,UNFINISHED,SQ,1/4BY2-1/8 IN.;1 DIAL,INDICATING,THD CHASING;1 DOG SET,1 EA,BENT TAIL,SINGLE SCREW 1/2,3/4,1,1-1/4,1-1/2 IN.CAP;1 HOLDER,CUTTING TOOL,BORING W/BORING BAR,30,45 AND 90 DEG END CAPS,CUTTER BITS AND WRENCH,1/2BY1-1/8 IN.SHANK,3/4 IN.BAR DIA;1 HOLDER,CUTTING OFF,STRAIGHT SHANK,W/CUTTER BIT,AND WRENCH,1/2BY1-1/8 IN.SHANK;1 EA RH,LH,STRAIGHT HOLDER,CUTTING TOOL,TURNING,OFFSET,W/CUTTER BIT AND WRENCH,1/2BY1-1/8 IN.SHANK;1 EA WRENCH,TAILSTOCK,TOOL POST IN |
| Electric Motor Quantity | 1 |
| Carriage Cross Feed Operation Method | HAND AND POWER |
| Electric Motor Horsepower Rating | 0.750 |
| Actual Swing Over Bed | 12.500 INCHES NOMINAL IN |
| Spindle Speed Quantity | 8 |
| Center to Center Distance | 35.000 INCHES NOMINAL IN |
| Mounting Type | BENCH |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | N |
| Part Number | Manufacturer |
|---|---|
| 5X12 PRIMARY | Caro, Inc. Dba South Bend Lathe (USA) |
| Reference | Meaning |
|---|---|
| 3416-1205-1235 | 6/9 Informative reference only U.S. Government activity |
NSN 3416-00-449-7188 is a Lathe,engine, manufactured by Caro, Inc. Dba South Bend Lathe, classified under FSC 3416, Lathes. Status: active.
NSN 3416-00-449-7188 has 1 manufacturer part number on file: 5X12 (Caro, Inc. Dba South Bend Lathe).
Key specifications for 5X12: Phase: SINGLE; Frequency in Hertz: 60.0; Current Type: AC; Carriage Quantity: 1. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.