The Lathe,engine, cataloged under National Stock Number 3416-00-333-5540, is classified within Federal Supply Class 3416 (Lathes) of the Metalworking Machinery (continued) group. The manufacturer of record is Caro, Inc. Dba South Bend Lathe. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-00-333-5540 |
| Primary Part Number | 198G |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — Lathes |
| Manufacturer | Caro, Inc. Dba South Bend Lathe |
| Status | ACTIVE |
| Swing Over Cross Slide | 18.750 INCHES NOMINAL IN |
| Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| Thread Quantity Range | +4.0 TO 224.0 PER INCH |
| Thread Change Quantity | 48 |
| Design Type | SCREW |
| Carriage Quantity | 1 |
| Headstock Drive Type | DIRECT PULLEY, BACK GEARED OR STEP CONE PULLEY |
| Rated Swing | 16.000 INCHES MINIMUM AND 24.000 INCHES MAXIMUM IN |
| Accessory Components and Quantity | SIZE LOO LONG TAPER KEY DRIVE SPINDLE NOSE IN LIEU OF REGULAR CAMLOCK SPINDLE NOSE;23/8-6 THREADED SPINDLE NOSE IN LIEU OF REGULAR CAMLOCK SPINDLE NOSE;SPECIAL PAINT COLORS;METRIC TRANSPOSING GEARS; INCH/METRIC CROSSFEED AND COMPOUND REST DIALS;TAPER ATTACHMENT;PREPARING LATHE FOR COOLANT;COOLING EQUIPMENT; FINE FEED HAND WHEEL;SCREW FEED DOUBLETOOL SLIDE;HARDENED TAPER TAILSTOCK SPINDLE;HARDENED AND GROUND CROSS FEEDAND COMPOUND REST SCREWS |
| Carriage Cross Feed Operation Method | HAND AND POWER |
| Spindle Speed Range in RPM | +15.0 TO 980.0 |
| Actual Swing Over Bed | 25.125 INCHES NOMINAL IN |
| Spindle Speed Quantity | 8 OR 16 |
| Center to Center Distance | 77.000 INCHES NOMINAL IN |
| Mounting Type | FLOOR |
| Purpose for Which Designed | GENERAL OR TOOLROOM |
| Performance Type | STANDARD DUTY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | N |
| Part Number | Manufacturer |
|---|---|
| 198G PRIMARY | Caro, Inc. Dba South Bend Lathe (USA) |
NSN 3416-00-333-5540 is a Lathe,engine, manufactured by Caro, Inc. Dba South Bend Lathe, classified under FSC 3416, Lathes. Status: active.
NSN 3416-00-333-5540 has 1 manufacturer part number on file: 198G (Caro, Inc. Dba South Bend Lathe).
Key specifications for 198G: Swing Over Cross Slide: 18.750 INCHES NOMINAL IN; Carriage Longitudinal Feed Operation Method: HAND AND POWER; Thread Quantity Range: +4.0 TO 224.0 PER INCH; Thread Change Quantity: 48. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.