The Lathe,engine, cataloged under National Stock Number 3416-00-243-1412, is classified within Federal Supply Class 3416 (Lathes) of the Metalworking Machinery (continued) group. The manufacturer of record is Caro, Inc. Dba South Bend Lathe. Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-00-243-1412 |
| Primary Part Number | 8113C |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — Lathes |
| Manufacturer | Caro, Inc. Dba South Bend Lathe |
| Status | ACTIVE |
| Swing Over Cross Slide | 8.125 INCHES NOMINAL IN |
| Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| Frequency in Hertz | 60.0 |
| Current Type | AC |
| Thread Quantity Range | +4.0 TO 224.0 PER INCH |
| Thread Change Quantity | 48 |
| Design Type | SCREW |
| Carriage Quantity | 1 |
| Headstock Drive Type | STEP CONE PULLEY, BACK GEARED |
| Voltage in Volts | 220.0 AND 440.0 |
| Carriage Feed Change Quantity | 48 |
| Rated Swing | 13.000 INCHES NOMINAL IN |
| Hole Diameter Through Spindle | 1.000 INCHES NOMINAL IN |
| Accessory Components and Quantity | NONE SPECIFIED |
| Electric Motor Quantity | 1 |
| Carriage Cross Feed Operation Method | HAND AND POWER |
| Spindle Speed Range in RPM | +34.0 TO 875.0 |
| Electric Motor Horsepower Rating | 1.000 |
| Actual Swing Over Bed | 13.125 INCHES NOMINAL IN |
| Spindle Speed Quantity | 8 |
| Center to Center Distance | 66.000 INCHES NOMINAL IN |
| Mounting Type | FLOOR |
| Purpose for Which Designed | TOOLROOM |
| Performance Type | LIGHT DUTY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 8113C PRIMARY | Caro, Inc. Dba South Bend Lathe (USA) |
NSN 3416-00-243-1412 is a Lathe,engine, manufactured by Caro, Inc. Dba South Bend Lathe, classified under FSC 3416, Lathes. Status: active.
NSN 3416-00-243-1412 has 1 manufacturer part number on file: 8113C (Caro, Inc. Dba South Bend Lathe).
Key specifications for 8113C: Swing Over Cross Slide: 8.125 INCHES NOMINAL IN; Carriage Longitudinal Feed Operation Method: HAND AND POWER; Frequency in Hertz: 60.0; Current Type: AC. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.