The Lathe,engine, cataloged under National Stock Number 3416-00-240-1310, is classified within Federal Supply Class 3416 (No Item Name Available) of the Metalworking Machinery (continued) group. The primary manufacturer of record is Caro, Inc. Dba South Bend Lathe. Government technical data includes 26 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 8 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-00-240-1310 |
| Primary Part Number | CL187AB |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — No Item Name Available |
| Manufacturer | Caro, Inc. Dba South Bend Lathe |
| Status | ACTIVE |
| Electric Motor Horsepower Rating | 1.0 |
| Center to Center Distance | 27.000 INCHES NOMINAL IN |
| Headstock Drive Type | STEP CONE PULLEY, BACK GEARED |
| Thread Change Quantity | 70 |
| Hole Diameter Through Spindle | 1.375 INCHES NOMINAL IN |
| Spindle Speed Range in RPM | +55.0 TO 1400.0 |
| Carriage Cross Feed Operation Method | POWER OR HAND |
| Voltage in Volts | 440.0 |
| Phase | THREE |
| Actual Swing Over Bed | 10.125 INCHES NOMINAL IN |
| Carriage Quantity | 1 |
| Carriage Feed Change Quantity | 70 |
| Thread Quantity Range | +4.0 TO 480.0 PER INCH |
| Swing Over Cross Slide | 5.875 INCHES NOMINAL IN |
| Rated Swing | 10.000 INCHES NOMINAL IN |
| Spindle Speed Quantity | 12 |
| Carriage Longitudinal Feed Operation Method | HAND OR POWER |
| Electric Motor Quantity | 1 |
| Frequency in Hertz | 60.0 |
| Reference Number Differentiating Characteristics | BTWL,BTWM,BTYP,BTSZ,BTTB,BTYQ,BTYR,BTYS,BTYT,BTYW,AWLX,ASHK,ACDC,ELEC,FREQ,FAAZ AKYD |
| Purpose for Which Designed | GENERAL |
| Accessory Components and Quantity | 1 BELT SET;1 CHUCK COLLET;1 CHUCK,INDEPENDENT 4 JAW;1 CHUCK,UNIVERSAL 3CHUCK;1 FACE PLATE;1 CARRIAGE STOP,MICROMETER;1 TAPER ATTACHMENT |
| Mounting Type | BENCH |
| Current Type | AC |
| Performance Type | STANDARD DUTY |
| Design Type | SCREW |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| CL187AB | Caro, Inc. Dba South Bend Lathe (USA) |
| 3416-0000-0000 | Defense Supply Center Richmond Industrial Plant Equipment /dla/ (USA) |
| CL187RB | Caro, Inc. Dba South Bend Lathe (USA) |
NSN 3416-00-240-1310 is a Lathe,engine, manufactured by Caro, Inc. Dba South Bend Lathe, classified under FSC 3416 (No Item Name Available). Status: active.
NSN 3416-00-240-1310 has 3 cross-referenced part numbers: CL187AB (Caro, Inc. Dba South Bend Lathe), 3416-0000-0000 (Defense Supply Center Richmond Industrial Plant Equipment /dla/), CL187RB (Caro, Inc. Dba South Bend Lathe).
There are 8 known substitutes for 3416-00-240-1310: 3416-01-016-8201, 3416-01-047-3525, 3416-01-091-7202 and 5 more. Verify interchangeability with system specifications before substitution.
Key specifications for CL187AB: Electric Motor Horsepower Rating: 1.0; Center to Center Distance: 27.000 INCHES NOMINAL IN; Headstock Drive Type: STEP CONE PULLEY, BACK GEARED; Thread Change Quantity: 70. 26 total characteristics are documented in the Federal Logistics Information System.