The Lathe,engine, cataloged under National Stock Number 3416-00-186-4080, is classified within Federal Supply Class 3416 (No Item Name Available) of the Metalworking Machinery (continued) group. The primary manufacturer of record is Makino Inc. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-00-186-4080 |
| Primary Part Number | 13REGAL |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — No Item Name Available |
| Manufacturer | Makino Inc |
| Status | ACTIVE |
| Electric Motor Horsepower Rating | 0.75 |
| Spindle Speed Quantity | 8 |
| Rated Swing | 13.000 INCHES NOMINAL IN |
| Electric Motor Horsepower Rating | 0.75 |
| Reference Number Differentiating Characteristics | ADQR,BTYP,AWLX,ASHK,ACDC,ELEC,FREQ,FAAZ |
| Carriage Feed Change Quantity | 48 |
| Current Type | AC |
| Headstock Drive Type | GEARED HEAD |
| Frequency in Hertz | 60.0 |
| Carriage Cross Feed Operation Method | HAND OR POWER |
| Phase | THREE |
| Frequency in Hertz | 60.0 |
| Actual Swing Over Bed | 13.250 INCHES NOMINAL IN |
| Thread Quantity Range | +4.0 TO 224.0 PER INCH |
| Swing Over Cross Slide | 8.250 INCHES NOMINAL IN |
| Rated Swing | 13.000 INCHES NOMINAL IN |
| Hole Diameter Through Spindle | 1.094 INCHES NOMINAL IN |
| Voltage in Volts | 110.0 |
| Reference Number Differentiating Characteristics | ADQR,BTYP,AWLX,ASHK,ACDC,ELEC,FREQ,FAAZ |
| Thread Change Quantity | 48 |
| Carriage Longitudinal Feed Operation Method | HAND OR POWER |
| Carriage Feed Change Quantity | 48 |
| Carriage Quantity | 1 |
| Spindle Speed Quantity | 8 |
| Electric Motor Quantity | 1 |
| Headstock Drive Type | GEARED HEAD |
| Spindle Speed Range in RPM | +25.0 TO 500.0 |
| Phase | THREE |
| Carriage Cross Feed Operation Method | HAND OR POWER |
| Electric Motor Quantity | 1 |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 13REGAL | Makino Inc (USA) |
| 3416-2111-3042 | Defense Supply Center Richmond Industrial Plant Equipment /dla/ (USA) |
| REGAL13 | Makino Inc (USA) |
NSN 3416-00-186-4080 is a Lathe,engine, manufactured by Makino Inc, classified under FSC 3416 (No Item Name Available). Status: active.
NSN 3416-00-186-4080 has 3 cross-referenced part numbers: 13REGAL (Makino Inc), 3416-2111-3042 (Defense Supply Center Richmond Industrial Plant Equipment /dla/), REGAL13 (Makino Inc).
There are 2 known substitutes for 3416-00-186-4080: 3416-00-186-4079, 3416-00-529-0814. Verify interchangeability with system specifications before substitution.
Key specifications for 13REGAL: Electric Motor Horsepower Rating: 0.75; Spindle Speed Quantity: 8; Rated Swing: 13.000 INCHES NOMINAL IN; Electric Motor Horsepower Rating: 0.75. 30 total characteristics are documented in the Federal Logistics Information System.