The Lathe,engine, cataloged under National Stock Number 3416-00-186-4077, is classified within Federal Supply Class 3416 (No Item Name Available) of the Metalworking Machinery (continued) group. The primary manufacturer of record is Defense Supply Center Richmond Industrial Plant Equipment /dla/. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-00-186-4077 |
| Primary Part Number | 3416-2111-4030 |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — No Item Name Available |
| Manufacturer | Defense Supply Center Richmond Industrial Plant Equipment /dla/ |
| Status | ACTIVE |
| Thread Quantity Range | +1.5 TO 80.0 PER INCH |
| Rated Swing | 12.000 INCHES NOMINAL IN |
| Design Type | SCREW |
| Current Type | AC |
| Carriage Longitudinal Feed Operation Method | HAND OR POWER |
| Swing Over Cross Slide | 9.000 INCHES NOMINAL IN |
| Hole Diameter Through Spindle | 1.500 INCHES NOMINAL IN |
| Headstock Drive Type | GEARED HEAD |
| Rated Swing | 12.000 INCHES NOMINAL IN |
| Carriage Feed Change Quantity | 36 |
| Frequency in Hertz | 60.0 |
| Swing Over Cross Slide | 9.000 INCHES NOMINAL IN |
| Spindle Speed Range in RPM | +19.0 TO 598.0 |
| Reference Number Differentiating Characteristics | BTSZ,BTTB,AWLX,ASHK,ACDC,ELEC,FREQ,FAAZ |
| Electric Motor Quantity | 1 |
| Hole Diameter Through Spindle | 1.500 INCHES NOMINAL IN |
| Carriage Cross Feed Operation Method | HAND OR POWER |
| Phase | THREE |
| Thread Quantity Range | +1.5 TO 80.0 PER INCH |
| Carriage Longitudinal Feed Operation Method | HAND OR POWER |
| Carriage Quantity | 1 |
| Actual Swing Over Bed | 14.500 INCHES NOMINAL IN |
| Thread Change Quantity | 36 |
| Voltage in Volts | 220.0 |
| Carriage Feed Change Quantity | 36 |
| Purpose for Which Designed | GENERAL |
| Performance Type | STANDARD DUTY |
| Headstock Drive Type | GEARED HEAD |
| Carriage Cross Feed Operation Method | HAND OR POWER |
| Accessory Components and Quantity | NONE SPECIFIED |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 3416-2111-4030 | Defense Supply Center Richmond Industrial Plant Equipment /dla/ (USA) |
| 12INGEAREDHEAD | Ge Aviation Systems Llc Dba Ge Aviation Systems Llc (USA) |
NSN 3416-00-186-4077 is a Lathe,engine, manufactured by Defense Supply Center Richmond Industrial Plant Equipment /dla/, classified under FSC 3416 (No Item Name Available). Status: active.
NSN 3416-00-186-4077 has 2 cross-referenced part numbers: 3416-2111-4030 (Defense Supply Center Richmond Industrial Plant Equipment /dla/), 12INGEAREDHEAD (Ge Aviation Systems Llc Dba Ge Aviation Systems Llc).
There is 1 known substitute for 3416-00-186-4077: 3413-00-517-1061. Verify interchangeability with system specifications before substitution.
Key specifications for 3416-2111-4030: Thread Quantity Range: +1.5 TO 80.0 PER INCH; Rated Swing: 12.000 INCHES NOMINAL IN; Design Type: SCREW; Current Type: AC. 30 total characteristics are documented in the Federal Logistics Information System.