The Lathe,engine, cataloged under National Stock Number 3416-00-150-7111, is classified within Federal Supply Class 3416 (Lathes) of the Metalworking Machinery (continued) group. Government technical data includes 25 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-00-150-7111 |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — Lathes |
| Status | ACTIVE |
| Phase | THREE |
| Swing Over Cross Slide | 6.250 INCHES NOMINAL IN |
| Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| Frequency in Hertz | 60.0 |
| Current Type | AC |
| Thread Quantity Range | +4.0 TO 240.0 PER INCH |
| Thread Change Quantity | 60 |
| Design Type | SCREW |
| Carriage Quantity | 1 |
| Headstock Drive Type | DIRECT PULLEY, BACK GEARED |
| Voltage in Volts | 220.0 AND 440.0 |
| Carriage Feed Change Quantity | 60 |
| Rated Swing | 10.000 INCHES MINIMUM AND 11.000 INCHES MAXIMUM IN |
| Hole Diameter Through Spindle | 1.375 INCHES NOMINAL IN |
| Accessory Components and Quantity | 3 JAW UNIVERSAL CHUCK 6 IN.; 2 CENTERS,SOLID,60 DEGREES,NO. 2 MORSE TAPER; 1 SPINDLE SLEEVE BUSHING,NO. 2 MORSE TAPER; 1 CHUCK,DRILL,NO. 2 MORSE TAPER; 1 STEADY REST; 1 TOOL POST IN |
| Electric Motor Quantity | 1 |
| Carriage Cross Feed Operation Method | HAND AND POWER |
| Spindle Speed Range in RPM | +50.0 TO 1350.0 |
| Electric Motor Horsepower Rating | 1.500 |
| Actual Swing Over Bed | 10.125 INCHES NOMINAL IN |
| Spindle Speed Quantity | 8 |
| Center to Center Distance | 36.000 INCHES NOMINAL IN |
| Purpose for Which Designed | TOOLROOM |
| Performance Type | LIGHT DUTY |
| Reference Number Differentiating Characteristics | APGF,BTWB,BTZR,BTSZ,AWLX,ASHK,ACDC,ELEC,FREQ,FAAZ,AAXX |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | N |
| Reference | Meaning |
|---|---|
| EXL56B | 3/1 Design control — primary reference Acme-Cleveland Corp National Acme Co Sheldon Machine Div |
NSN 3416-00-150-7111 is a Lathe,engine, classified under FSC 3416, Lathes. Status: active.
Key specifications for 3416-00-150-7111: Phase: THREE; Swing Over Cross Slide: 6.250 INCHES NOMINAL IN; Carriage Longitudinal Feed Operation Method: HAND AND POWER; Frequency in Hertz: 60.0. 25 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.