The RESISTOR,FIXED,FILM is a Legrand industrial component. Key specifications include material: STEEL UNS K08500 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, body_length: 0.204 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN, load_rating: 13.500 POUNDS MINIMUM AND 16.400 POUNDS MAXIMUM LBS, body_diameter: 0.078 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, bore_diameter: 0.810 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-270-1400, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | STEEL UNS K08500 OVERALL |
| end_style | SPRING END,SQUARED AND GROUND BOTH ENDS |
| body_length | 0.204 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN |
| load_rating | 13.500 POUNDS MINIMUM AND 16.400 POUNDS MAXIMUM LBS |
| body_diameter | 0.078 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN |
| bore_diameter | 0.810 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN |
| coil_quantity | 24 |
| terminal_type | WIRE LEAD |
| inclosure_type | ENCAPSULATED |
| terminal_length | 1.000 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN |
| style_designator | CYLINDRICAL |
| spring_free_length | 4.060 INCHES NOMINAL IN |
| NSN | 5905-00-270-1400 |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-55182/1 GOVERNMENT SPECIFICATION |
| TEST DATA DOCUMENT | 81349-MIL-R-55182 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| BODY LENGTH | 0.204 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN |
| AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS DEGC |
| MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR | C |
| TERMINAL TYPE | WIRE LEAD |
| RELIABILITY INDICATOR | ESTABLISHED |
| BODY DIAMETER | 0.078 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN |
| POWER DISSIPATION RATING IN WATTS | 0.100 FREE AIR |
| INCLOSURE TYPE | ENCAPSULATED |