PartsTable
Technical Data Sheet
34014 ✓ Verified by PartsTable
Lindy · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

<b>Run 2 connections over one cable!</b><br>Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.<br><br>Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-111-2124, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
34014
NSN: 5330-00-111-2124
FSC: 5330
CAGE: 70485 — ATLANTIC INDIA RUBBER CO INC (USA)
SPECIFICATIONS
end_item_nameREEFER MONITORING SYSTEM PMS 6000-E551
NSN5330-00-111-2124
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 34014 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
RIM SURFACE WIDTH: 0.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLE: ANGLE
CROSS-SECTIONAL HEIGHT: 0.188 INCHES NOMINAL IN
PERIPHERAL DIAMETER: 0.656 INCHES NOMINAL IN
MATERIAL: RUBBER SYNTHETIC OVERALL
ANGLE: 20.0 DEGREES NOMINAL
CENTER HOLE DIAMETER: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RIM SURFACE WIDTH0.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEANGLE
CROSS-SECTIONAL HEIGHT0.188 INCHES NOMINAL IN
PERIPHERAL DIAMETER0.656 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
ANGLE20.0 DEGREES NOMINAL
CENTER HOLE DIAMETER0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
52228Interchangeable
interchangeable cross-reference
interchangeable
DM-2307Interchangeable
interchangeable cross-reference
interchangeable
A1287Interchangeable
interchangeable cross-reference
interchangeable
GGG-W-660Interchangeable
interchangeable cross-reference
interchangeable
B107.110 CAT 2 TY1Interchangeable
interchangeable cross-reference
interchangeable
GGG-W-660 TY1CL1STAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 34014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34014?
34014 is a SOCKET WRENCH SPECIAL manufactured by Lindy.
What parts can replace 34014?
There are 14 known substitutes for 34014: 52228, DM-2307, A1287 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 34014?
34014 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-111-2124. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 34014