PartsTable
Technical Data Sheet
Download PDF

3400S-40-501 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

3400S-40-501: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 1.750 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.812 INCHES NOMINAL IN, shaft_runout: 0.002 INCHES IN, actuator_type: SINGLE SHAFT. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-444-6499, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3400S-40-501
NSN: 5905-00-444-6499
FSC: 5905 — Resistor
CAGE: 3Z867 — BOURNS, INC. DBA BOURNS SENSOR CONTROLS (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length1.750 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length0.812 INCHES NOMINAL IN
shaft_runout0.002 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter1.812 INCHES NOMINAL IN
lateral_runout0.005 INCHES IN
shaft_diameter0.250 INCHES NOMINAL IN
shaft_end_play0.00500 INCHES IN
mounting_methodSTANDARD BUSHING
section_quantity1
NSN5905-00-444-6499
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN 3400S-40-501 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 2.00 INCH-OUNCES IN
•
NONTURN DEVICE LOCATION: AT 6 OCLOCK
•
BODY DIAMETER: 1.812 INCHES NOMINAL IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
LATERAL RUNOUT: 0.005 INCHES IN
•
ELECTRICAL RESISTANCE PER SECTION: 500.000 OHMS SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 105.0 SINGLE SECTION
•
SECTION QUANTITY: 1
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE2.00 INCH-OUNCES IN
NONTURN DEVICE LOCATIONAT 6 OCLOCK
BODY DIAMETER1.812 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH32.0
LATERAL RUNOUT0.005 INCHES IN
ELECTRICAL RESISTANCE PER SECTION500.000 OHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES NOMINAL IN
NONTURN DEVICE RADIUS0.562 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 6
860-501Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
56C4Reference document
Same NSN cross-reference
Reference document — Secondary reference
AR500L.1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
860-9880Reference document
Same NSN cross-reference
Reference document — Secondary reference
2100-2348Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
860-500Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3400S-40-501?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3400S-40-501?
3400S-40-501 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3400S-40-501?
There are 6 known substitutes for 3400S-40-501: 860-501, 56C4, AR500L.1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3400S-40-501?
3400S-40-501 is cataloged in the U.S. Government catalog under NSN 5905-00-444-6499. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3400S-40-501