PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 34-11-1
34-11-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TERMINAL,LUG is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, body_style: PLAIN, SOLID, bore_style: W/ KEYWAY BOTH ENDS, teeth_type: STRAIGHT, pitch_angle: 62.0000 DEGREES, thread_class: 2A OVERALL A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-249-5275, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
34-11-1
NSN: 5330-00-249-5275
FSC: 5330
CAGE: 66155 — PORTA DRILL INC (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
body_stylePLAIN, SOLID
bore_styleW/ KEYWAY BOTH ENDS
teeth_typeSTRAIGHT
pitch_angle62.0000 DEGREES
thread_class2A OVERALL A
body_diameter0.875 INCHES NOMINAL IN
thread_length4.000 INCHES NOMINAL ROD CONNECTION IN
overall_length72.000 INCHES NOMINAL IN
pitch_diameter1.6042 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
teeth_quantity77
NSN5330-00-249-5275
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 34-11-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 2.812 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
CENTER HOLE DIAMETER: 2.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.562 INCHES NOMINAL IN
•
RIM SURFACE WIDTH: 0.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER2.812 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
CENTER HOLE DIAMETER2.188 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.562 INCHES NOMINAL IN
RIM SURFACE WIDTH0.406 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
D15-640IPC618Interchangeable
interchangeable cross-reference
interchangeable
D15-463GPC205Interchangeable
interchangeable cross-reference
interchangeable
D15-426APC224Interchangeable
interchangeable cross-reference
interchangeable
34111Interchangeable
interchangeable cross-reference
interchangeable
E9707-22Interchangeable
interchangeable cross-reference
interchangeable
5L.4111.002.38Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 34-11-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34-11-1?
34-11-1 is a TERMINAL,LUG.
What parts can replace 34-11-1?
There are 8 known substitutes for 34-11-1: D15-640IPC618, D15-463GPC205, D15-426APC224 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 34-11-1?
34-11-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-249-5275. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 34-11-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026