PartsTable
Technical Data Sheet
PartsTable / MRO / 34-1-30
34-1-30 ✓ Verified by PartsTable
Indesit · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Connection cable for USB devices such as USB hubs, card readers, digital cameras, etc. to connect with your PC or Mac. The small 5-pin mini USB connector has proved and enforced by many manufacturers to be the ideal space-saving interface.

The angled connector allows you easier to connect or install the USB cable in tight spaces This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-194-3573, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 34-1-30
NSN: 5330-00-194-3573
FSC: 5330
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
width0.375 INCHES NOMINAL IN
materialSTEEL
body_styleBUSHING MOUNT
body_width0.688 INCHES NOMINAL IN
shank_typeSTRAIGHT
body_length1.125 INCHES NOMINAL IN
design_typeGENERAL PURPOSE DISTANCE MEASURING
body_materialALUMINUM ALLOY 6061
overall_width0.688 INCHES NOMINAL IN
actuator_styleROUND
bushing_length0.469 INCHES NOMINAL IN
inclosure_typeCASE
NSN5330-00-194-3573
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 34-1-30 MFR: Indesit ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
2D10-9Interchangeable
interchangeable cross-reference
interchangeable
10282579-1Interchangeable
interchangeable cross-reference
interchangeable
C5114311Interchangeable
interchangeable cross-reference
interchangeable
81051GInterchangeable
interchangeable cross-reference
interchangeable
34-130Interchangeable
interchangeable cross-reference
interchangeable
100319-62Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 34-1-30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34-1-30?
34-1-30 is a PISTON,LINEAR ACTUATING CYLINDER manufactured by Indesit. It is classified as a MRO (MRO_GENERAL).
What parts can replace 34-1-30?
There are 18 known substitutes for 34-1-30: 2D10-9, 10282579-1, C5114311 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 34-1-30?
34-1-30 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-194-3573. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 34-1-30

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026