PartsTable
Technical Data Sheet
Download PDF

33S44375-1805 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

33S44375-1805: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING CASE, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, housing_bore_diameter: 1.500 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-559-2696, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
33S44375-1805
NSN: 5330-00-559-2696
FSC: 5330 — Packing and Gasket Materials
CAGE: 94135 — NAVAL ORDNANCE STANDARDS (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING CASE
case_styleSQUARE
seal_width0.375 INCHES NOMINAL IN
housing_bore_diameter1.500 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.875 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-559-2696
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 33S44375-1805 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.500 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 0.875 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.375 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.500 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER0.875 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 7
33S44383-1805Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
00044Reference document
Same NSN cross-reference
Reference document — Secondary reference
10-513024Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
149H28Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
513024Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
63X216Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 33S44375-1805?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 33S44375-1805?
33S44375-1805 is a SEAL,PLAIN ENCASED.
What parts can replace 33S44375-1805?
There are 7 known substitutes for 33S44375-1805: 33S44383-1805, 00044, 10-513024 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 33S44375-1805?
33S44375-1805 is cataloged in the U.S. Government catalog under NSN 5330-00-559-2696. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 33S44375-1805

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.