PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 33874
33874 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: SQUARE, pin_overall_length: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, pin_overall_diameter: 0.0900 INCHES MINIMUM AND 0.0920 INCHES MAXIMUM IN, second_end_relationship_with_first_end: IDENTICAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-298-1852, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
33874
NSN: 5315-00-298-1852
FSC: 5315
CAGE: 63005 — ROLLS-ROYCE CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleSQUARE
pin_overall_length0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
pin_overall_diameter0.0900 INCHES MINIMUM AND 0.0920 INCHES MAXIMUM IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-298-1852
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 33874 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5132 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1095 OVERALL
•
PIN OVERALL DIAMETER: 0.0920 INCHES MINIMUM AND 0.0930 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL LENGTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5132 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
MATERIALSTEEL COMP 1095 OVERALL
PIN OVERALL DIAMETER0.0920 INCHES MINIMUM AND 0.0930 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL LENGTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
803-002Interchangeable
interchangeable cross-reference
interchangeable
516A106Interchangeable
interchangeable cross-reference
interchangeable
8032Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 33874?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 33874?
33874 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 33874?
There are 3 known substitutes for 33874: 803-002, 516A106, 8032. Substitute compatibility should be verified for your specific system.
Is 33874 still available?
33874 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 33874

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026