PartsTable
Technical Data Sheet
Download PDF

3384889 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

3384889: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1212 OVERALL, nut_style: HEXAGON, nut_height: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UN, special_features: HEXAGONAL POINTS TO BE ROUNDED TO 2 INCH RADIUS IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-376-7806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3384889
NSN: 5310-00-376-7806
FSC: 5310 — Nuts and Washers
CAGE: 55380 — HATCH & KIRK, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 1212 OVERALL
nut_styleHEXAGON
nut_height1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
thread_class3B
thread_seriesUN
special_featuresHEXAGONAL POINTS TO BE ROUNDED TO 2 INCH RADIUS IN
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL NUT
width_across_flats3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM IN
nominal_thread_size2.500 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch12
NSN5310-00-376-7806
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3384889 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM IN
•
THREAD SERIES: UN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 2.500 INCHES IN
•
NUT HEIGHT: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 90.0 DEGREES NOMINAL NUT
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM IN
THREAD SERIESUN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE2.500 INCHES IN
NUT HEIGHT1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
SPECIAL FEATURESHEXAGONAL POINTS TO BE ROUNDED TO 2 INCH RADIUS IN
COUNTERSINK ANGLE90.0 DEGREES NOMINAL NUT
NUT STYLEHEXAGON
THREAD CLASS3B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 3384889?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3384889?
3384889 is a NUT,PLAIN,HEXAGON.
What is the NSN for 3384889?
3384889 is cataloged in the U.S. Government catalog under NSN 5310-00-376-7806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3384889