PartsTable
Technical Data Sheet
Download PDF

338262R — SEAL,NONMETALLIC STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

338262R: SEAL,NONMETALLIC STRIP.

The SEAL,NONMETALLIC STRIP is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, construction: SOLID, end_cut_angle: 45.0 DEGREES, overall_length: 25.010 INCHES NOMINAL IN, style_designator: STRIP, attachment_method: CEMENTED. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-588-1051, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
338262R
NSN: 5330-00-588-1051
FSC: 5330 — Packing and Gasket Materials
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialRUBBER OVERALL
constructionSOLID
end_cut_angle45.0 DEGREES
overall_length25.010 INCHES NOMINAL IN
style_designatorSTRIP
attachment_methodCEMENTED
fabrication_methodSOLID
cross-sectional_width0.620 INCHES NOMINAL IN
cross-sectional_height0.437 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE
smooth_finish_surface_locationEXTERNAL
NSN5330-00-588-1051
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 338262R MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.437 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.620 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRIP
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
END CUT ANGLE: 45.0 DEGREES
•
MATERIAL: RUBBER OVERALL
•
FABRICATION METHOD: SOLID
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.437 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.620 INCHES NOMINAL IN
STYLE DESIGNATORSTRIP
OVERALL LENGTH25.010 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESQUARE
END CUT ANGLE45.0 DEGREES
MATERIALRUBBER OVERALL
FABRICATION METHODSOLID
SMOOTH FINISH SURFACE LOCATIONEXTERNAL
CONSTRUCTIONSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
5330PL1029396Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 338262R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 338262R?
338262R is a SEAL,NONMETALLIC STRIP.
What parts can replace 338262R?
There is 1 known substitute for 338262R: 5330PL1029396. Substitute compatibility should be verified for your specific system.
What is the NSN for 338262R?
338262R is cataloged in the U.S. Government catalog under NSN 5330-00-588-1051. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 338262R