PartsTable
Technical Data Sheet
Download PDF

33806P-106J06-10600 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

33806P-106J06-10600: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 30.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, connection_type: THREADED EXTERNAL PIPE SECOND END, inside_diameter: 0.375 INCHES NOMINAL IN, connection_style: SWIVEL, PLAIN SECOND END, outside_diameter: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-339-8530, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
33806P-106J06-10600
NSN: 4720-01-339-8530
FSC: 4720 — Hose and Flexible Tubing
CAGE: 79740 — CAMPTON ELECTRONIC MFG INC (USA)
SPECIFICATIONS
seat_angle30.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
connection_typeTHREADED EXTERNAL PIPE SECOND END
inside_diameter0.375 INCHES NOMINAL IN
connection_styleSWIVEL, PLAIN SECOND END
outside_diameter0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure900.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.375 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
end_item_identification2330-01-275-7474 HEMAT TRAILER
NSN4720-01-339-8530
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 33806P-106J06-10600 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 5
62W3500B0Reference document
Same NSN cross-reference
Reference document — Secondary reference
33806U-106J06-1000Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
33806U-106J06-10000Reference document
Same NSN cross-reference
Reference document — Secondary reference
SW25338-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SW25338Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 33806P-106J06-10600?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 33806P-106J06-10600?
33806P-106J06-10600 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 33806P-106J06-10600?
There are 5 known substitutes for 33806P-106J06-10600: 62W3500B0, 33806U-106J06-1000, 33806U-106J06-10000 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 33806P-106J06-10600?
33806P-106J06-10600 is cataloged in the U.S. Government catalog under NSN 4720-01-339-8530. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 33806P-106J06-10600