PartsTable
Technical Data Sheet
Download PDF

337D391H01 — CLIP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

337D391H01: CLIP,RETAINING.

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.370 INCHES NOMINAL IN, material: STEEL COMP 302, overall_height: 1.400 INCHES NOMINAL IN, stock_diameter: 0.040 INCHES NOMINAL IN, style_designator: PIN, surface_treatment: PASSIVATE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-139-6893, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
337D391H01
NSN: 5340-00-139-6893
FSC: 5340 — Hardware, Commercial
CAGE: 48306 — NORTHROP GRUMMAN SUPPORT SERVICES CORP (USA)
SPECIFICATIONS
width0.370 INCHES NOMINAL IN
materialSTEEL COMP 302
overall_height1.400 INCHES NOMINAL IN
stock_diameter0.040 INCHES NOMINAL IN
style_designatorPIN
surface_treatmentPASSIVATE
casehardening_indicatorNOT CASEHARDENED
material_document_and_classificationQQ-W-423 COMP 302 COND B FORM 1 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-139-6893
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 337D391H01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: PIN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423 COMP 302 COND B FORM 1 FED SPEC SINGLE MATERIAL RESPONSE
•
STOCK DIAMETER: 0.040 INCHES NOMINAL IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
SURFACE TREATMENT: PASSIVATE
•
WIDTH: 0.370 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 302
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.400 INCHES NOMINAL IN
STYLE DESIGNATORPIN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423 COMP 302 COND B FORM 1 FED SPEC SINGLE MATERIAL RESPONSE
STOCK DIAMETER0.040 INCHES NOMINAL IN
CASEHARDENING INDICATORNOT CASEHARDENED
SURFACE TREATMENTPASSIVATE
WIDTH0.370 INCHES NOMINAL IN
MATERIALSTEEL COMP 302
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 337D391H01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 337D391H01?
337D391H01 is a CLIP,RETAINING.
What is the NSN for 337D391H01?
337D391H01 is cataloged in the U.S. Government catalog under NSN 5340-00-139-6893. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 337D391H01